GOST 30804.6.4-2013 PDF

Full title and description

GOST 30804.6.4-2013 — Electromagnetic compatibility of technical equipment. Electromagnetic disturbance from technical equipment intended for use in industrial environments. Limits and test methods. This interstate (GOST) standard is a Russian-language adoption and modification of IEC 61000-6-4:2006, specifying emission limits and measurement/test methods for equipment used in industrial environments.

Abstract

GOST 30804.6.4-2013 defines emission limits and standardized test and measurement procedures for electromagnetic disturbances generated by technical equipment operating in industrial environments. It harmonizes national practice with the international IEC 61000-6-4 framework while recording national modifications where required. The document covers radiated and conducted disturbance measurements and measurement setups appropriate for industrial classification.

General information

• Status: Introduced / active (implemented as an interstate standard and adopted for national use; original introduction effective 1 January 2014).
• Publication date: 2013 (officially put into effect 01 January 2014).
• Publisher: Federal Agency for Technical Regulation and Metrology (Rosstandart) / published via Standartinform for the official edition.
• ICS / categories: EMC / emissions — ICS 33.100.10 (electromagnetic compatibility — emission).
• Edition / version: 2013 (first introduction as GOST 30804.6.4-2013; degree of correspondence to IEC 61000-6-4:2006 is modified (MOD)).
• Number of pages: 15 pages (typical published edition length).

Scope

The standard establishes limits and measurement/test methods for electromagnetic disturbances (emissions) produced by electrical, electronic and radio-electronic equipment intended for use in industrial zones. The scope covers the relevant frequency ranges specified in the text (reference materials indicate coverage up to the order of 0–400 GHz for related EMC documents and applicability statements) and applies when no more specific interstate standards exist for particular equipment groups. The standard is a national adoption/modification of IEC 61000-6-4:2006.

Key topics and requirements

• Emission limits for radiated and conducted disturbances applicable to industrial environments.
• Measurement methods and test setups for determining emitted disturbances (antenna and test site requirements, measurement bandwidths, detector functions).
• Classification and definition of industrial environment types and relevance to limit selection.
• Requirements for instrumentation, calibration and measurement uncertainty considerations.
• Normative references and alignment with IEC/CISPR methods; national modifications (MOD) where text or references were adapted.

Typical use and users

Used by EMC test laboratories, equipment manufacturers, certification bodies and design engineers who must demonstrate that industrial equipment meets emission limits for deployment in industrial zones. Also referenced by conformity assessment and regulatory authorities when assessing product compliance with national/interstate EMC requirements.

Related standards

Directly related to and based on IEC 61000-6-4:2006. Related Russian/interstate standards in the same EMC family include other parts of the GOST 30804 series and earlier national standards it replaced (for example, GOST R 51317.6.4-2009 was superseded by this GOST). The standard is used alongside EMC testing methods from the IEC 61000-4 series (for immunity/testing techniques) and CISPR measurement standards where referenced.

Keywords

electromagnetic compatibility; EMC; emissions; industrial environment; emission limits; test methods; measurement; IEC 61000-6-4; GOST; radiated disturbance; conducted disturbance.

FAQ

Q: What is this standard?

A: GOST 30804.6.4-2013 is an interstate (GOST) standard that sets emission limits and measurement/test procedures for electromagnetic disturbances from technical equipment intended for use in industrial environments; it is the national adoption/modification of IEC 61000-6-4:2006.

Q: What does it cover?

A: It covers emission (radiated and conducted) limits, measurement arrangements and procedures, and related requirements for test instrumentation and measurement uncertainty applicable to industrial environments; it is intended to be applied where no more specific interstate EMC standard exists for the equipment group.

Q: Who typically uses it?

A: EMC laboratories, product designers and manufacturers of industrial electrical/electronic equipment, conformity assessment bodies and regulators use the standard to test, assess and certify emission performance for industrial applications.

Q: Is it current or superseded?

A: As published it was introduced for national use with effect from 1 January 2014 and has been the operative GOST adoption of IEC 61000-6-4:2006; commercial and standards databases show reprints/reissues (for example a reissue noted in 2020), and no widely published replacement has been identified in those sources — however standards status can change, so users should verify the current legal/technical status with the national standards body (Rosstandart) or the official interstate standards catalog for the latest withdrawal or revision notices.

Q: Is it part of a series?

A: Yes — it belongs to the GOST 30804 / 30805 family of EMC standards that mirror and reference parts of the IEC 61000 and CISPR series (other parts cover immunity, specific equipment groups, measurement techniques and limits for residential, commercial and industrial environments).

Q: What are the key keywords?

A: EMC, emissions, industrial environment, emission limits, test methods, radiated disturbance, conducted disturbance, IEC 61000-6-4.