GOST 9421-80 PDF

Full title and description

GOST 9421-80 — "Картон тарный плоский склеенный. Технические условия" (English title: "Container plain pasted fibreboard. Specifications"). The standard establishes technical conditions, grades and sizes, test methods, acceptance rules and requirements for flat pasted container board produced by bonding several layers of paperboard and intended for manufacture of packaging (carton) products.

Abstract

GOST 9421-80 defines the composition, physical and mechanical properties, marking, packaging, transportation and storage rules for plain pasted container fibreboard (flat pasted carton). It includes requirements for mass per unit area, tensile strength, moisture content, methods of sampling and testing, and acceptance criteria used by manufacturers and purchasers of packaging board. The text of the standard is short (typically 7 pages) and has known amendments incorporated.

General information

• Status: Partially superseded / "replaced in part" — some provisions remain in use while portions have been replaced by later standards; sources show both active use and replacement-in-part status.
• Publication date: Approved 1980, introduced (effective) 01 January 1982 (designation GOST 9421-80).
• Publisher: Issued under the USSR / Russian standards system — approved by the State Committee for Standards (Gosstandart) and published by the Standards Publishing House (Издательство стандартов).
• ICS / categories: Packaging and placement of goods — packaging materials and accessories (packaging classification: packaging materials / packaging items area). Often catalogued under the packaging sector (55; 55.040).
• Edition / version: GOST 9421-80 (original approval 1980, effective 1982) with recorded amendments (examples: amendments in 1984, 1985 and 1992 referenced in catalogue entries).
• Number of pages: 7 pages (typical commercial copies and catalogue records list 7 pages).

Scope

The standard applies to flat pasted container board produced by gluing several layers of paperboard (pasted fibreboard) intended for manufacture of boxes, cartons and other packaging. It covers specified grades and sizes, required physical and mechanical characteristics, sampling and test methods, acceptance procedures, and requirements for packaging, marking, transport and storage of the board. The standard is intended for manufacturers of container board, box producers, quality and inspection laboratories, purchasers of packaging materials and regulatory bodies.

Key topics and requirements

• Definition and grades of flat pasted container board (designation of marks and permitted dimensions).
• Physical and mechanical requirements (mass per unit area / grammage, tensile strength in machine and cross directions, bending and crush resistance, permissible moisture content and visual appearance requirements).
• Methods of sampling and standard test procedures for determining the listed properties.
• Acceptance rules and criteria for consignments (lot acceptance, sampling plans, rejection conditions).
• Requirements for packaging, marking, transportation and storage of stacked board to preserve specified properties.
• Cross-references to related standards and normative documents (normative references used for test methods and related packaging standards).

Typical use and users

GOST 9421-80 is used by pulp-and-paper mills, board manufacturers, box and packaging converters, quality control and testing laboratories, procurement and logistics departments, and standardization/regulatory organizations that require uniform technical conditions for plain pasted container board. It is applied when specifying board for industrial and commercial packaging and when performing acceptance testing of supplied board.

Related standards

Documents often referenced together with GOST 9421-80 include predecessor standards (e.g., earlier GOST versions such as GOST 9421-60), other paper and board test-method standards, and later standards that replace or update specific provisions (sources indicate parts were later covered by standards such as GOST 32096-2013 for certain food-packaging board requirements). Users should check the current status of normative references before application.

Keywords

GOST 9421-80; container board; pasted fibreboard; flat pasted carton; packaging board; cartonboard; technical conditions; packaging materials; paperboard; grammage; tensile strength; ГОСТ 9421-80; картон тарный плоский склеенный.

FAQ

Q: What is this standard?

A: GOST 9421-80 is a Soviet / Russian state standard titled "Картон тарный плоский склеенный. Технические условия" (Container plain pasted fibreboard. Specifications) that sets technical requirements and acceptance/test rules for flat pasted container board used to make packaging.

Q: What does it cover?

A: It covers grades, dimensions, physical and mechanical properties (e.g., grammage, tensile and crushing properties, moisture), sampling and testing methods, acceptance criteria, and packaging/marking/transport/storage requirements for pasted container board.

Q: Who typically uses it?

A: Manufacturers of container board and cartons, packaging converters, QC and testing laboratories, procurement and logistics teams, and national/regional standards bodies—any party specifying or verifying technical quality of pasted cartonboard.

Q: Is it current or superseded?

A: The standard is recorded as "replaced in part" (частично заменён) — some provisions have been superseded by later standards while other parts may still be used in practice. Catalogue records show the standard was approved in 1980 and effective from 01 January 1982; certain administrative/end-of-validity notes list 01 July 2014 for termination of some provisions. Users should consult current national catalogs or Rosstandart for up-to-date legal/technical status before relying on any specific clause.

Q: Is it part of a series?

A: GOST 9421-80 belongs to the packaging and materials series of GOST standards (packaging materials and accessories). It follows earlier GOST versions for container board and is connected by normative references to other GOSTs that specify test methods and related packaging material requirements.

Q: What are the key keywords?

A: Container board; pasted fibreboard; cartonboard; packaging materials; grammage; tensile strength; ГОСТ; technical conditions.