Поиск

Resistance welding. Welding current measurement for resistance welding. Current sensing coil.

Resistance welding. Destructive tests of welds. Pressure test of resistance seam welds.

Simultaneous interpreting — Interpreters’ working environment. Requirements and recommendations for interpret…

Simultaneous interpreting - Interpreters’ working environment - Part 3: Requirements and recommendations for…

Overview EN ISO 17651-3:2026 is an international standard developed by CEN, specifying the requirements and recommendations for the design, equipment, and operation of interpreting hubs used in simul…

Simultaneous interpreting - Interpreters’ working environment - Part 1: Requirements and recommendations for…

Overview EN ISO 17651-1:2024 - Simultaneous interpreting - Interpreters’ working environment - Part 1: Requirements and recommendations for permanent booths - specifies design, usability and accessib…

Simultaneous interpreting - Interpreters’ working environment - Part 2: Requirements and recommendations for…

Overview EN ISO 17651-2:2024 - Simultaneous interpreting - Interpreters’ working environment - Part 2: Requirements and recommendations for mobile booths (ISO 17651-2:2024) specifies design, siting a…

Simultaneous interpreting - Interpreters’ working environment - Part 2: Requirements and recommendations for…

Overview EN ISO 17651-2:2024 - Simultaneous interpreting - Interpreters’ working environment - Part 2: Requirements and recommendations for mobile booths (ISO 17651-2:2024) specifies design, siting a…

Simultaneous interpreting - Interpreters’ working environment - Part 1: Requirements and recommendations for…

Overview EN ISO 17651-1:2024 - Simultaneous interpreting - Interpreters’ working environment - Part 1: Requirements and recommendations for permanent booths - specifies design, usability and accessib…

Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology (ISO 17658:2002)

Overview SIST EN ISO 17658:2015 is an international standard published by CEN that establishes terminology related to imperfections found in oxyfuel flame cuts, laser beam cuts, and plasma cuts in me…

Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology (ISO 17658:2002)

Overview EN ISO 17658:2015 is an international standard published by CEN that establishes terminology related to imperfections found in oxyfuel flame cuts, laser beam cuts, and plasma cuts in metalli…

Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds…

Overview SIST EN ISO 17653:2012 is an international standard developed by the European Committee for Standardization (CEN) that specifies the procedures for conducting torsion tests on resistance spo…

Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds…

Overview EN ISO 17653:2012 is an international standard developed by the European Committee for Standardization (CEN) that specifies the procedures for conducting torsion tests on resistance spot wel…

Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)

Overview SIST EN ISO 17654:2011 is an international standard developed by the International Organization for Standardization (ISO) and adopted by the European Committee for Standardization (CEN). It…

Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)

Overview EN ISO 17654:2011 is an international standard developed by the International Organization for Standardization (ISO) and adopted by the European Committee for Standardization (CEN). It speci…

Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with…

Overview EN ISO 17657-2:2007 / ISO 17657-2:2005 defines requirements for a welding current meter with a current sensing coil used in resistance welding. The standard specifies how to measure weld tim…

Resistance welding - Welding current measurement for resistance welding - Part 1: Guidelines for measurement…

Overview EN ISO 17657-1:2007 (ISO 17657-1:2005) provides guidelines for the measurement of welding current in resistance welding. It covers the equipment, terminology and basic measurement practices…

Resistance welding - Welding current measurement for resistance welding - Part 3: Current sensing coil (ISO 1…

Overview EN ISO 17657-3:2007 (ISO 17657-3:2005) specifies requirements for toroidal current sensing coils used as sensors in welding current measurement systems for resistance welding. The standard a…

Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of welding cur…

Overview EN ISO 17657-5:2007 (ISO 17657-5:2005) defines a verification procedure for welding current meters and monitoring devices that use a current sensing coil for measuring welding current in res…

Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system (ISO 176…

Overview EN ISO 17657-4:2007 (ISO 17657-4:2005) defines calibration systems and procedures for measuring welding current in resistance welding. It covers calibration of complete welding current measu…

Resistance welding - Welding current measurement for resistance welding - Part 3: Current sensing coil (ISO 1…

Overview EN ISO 17657-3:2007 (ISO 17657-3:2005) specifies requirements for toroidal current sensing coils used as sensors in welding current measurement systems for resistance welding. The standard a…

Resistance welding - Welding current measurement for resistance welding - Part 5: Verification of welding cur…

Overview EN ISO 17657-5:2007 (ISO 17657-5:2005) defines a verification procedure for welding current meters and monitoring devices that use a current sensing coil for measuring welding current in res…

Resistance welding - Welding current measurement for resistance welding - Part 1: Guidelines for measurement…

Overview EN ISO 17657-1:2007 (ISO 17657-1:2005) provides guidelines for the measurement of welding current in resistance welding. It covers the equipment, terminology and basic measurement practices…

Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with…

Overview EN ISO 17657-2:2007 / ISO 17657-2:2005 defines requirements for a welding current meter with a current sensing coil used in resistance welding. The standard specifies how to measure weld tim…

Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system (ISO 176…

Overview EN ISO 17657-4:2007 (ISO 17657-4:2005) defines calibration systems and procedures for measuring welding current in resistance welding. It covers calibration of complete welding current measu…

Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002)

Overview EN ISO 17659:2004 (ISO 17659:2002) is a CEN/ISO welding standard that provides multilingual terms and pictorial illustrations for welded joints, joint preparation and welds. The standard lin…

Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002)

Overview EN ISO 17659:2004 (ISO 17659:2002) is a CEN/ISO welding standard that provides multilingual terms and pictorial illustrations for welded joints, joint preparation and welds. The standard lin…

Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17…

Overview SIST EN ISO 17652-3:2003 is a European and international standard specifying a test method for evaluating the influence of shop primers on the maximum cutting speed achievable during thermal…

Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (I…

Overview EN ISO 17652-1:2003 - "Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements" defines the standardized framework for assessing how shop p…

Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and g…

Overview SIST EN ISO 17652-4:2003 is a European and international standard that specifies the requirements and test methods for evaluating the influence of shop primers on the emission of fumes and g…

Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of s…

Overview EN ISO 17652-2:2003 - “Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers” (CEN adoption of ISO 17652-2:2003) specifies…

Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and g…

Overview EN ISO 17652-4:2003 is a European and international standard that specifies the requirements and test methods for evaluating the influence of shop primers on the emission of fumes and gases…

Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (I…

Overview EN ISO 17652-1:2003 - "Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements" defines the standardized framework for assessing how shop p…

Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17…

Overview EN ISO 17652-3:2003 is a European and international standard specifying a test method for evaluating the influence of shop primers on the maximum cutting speed achievable during thermal cutt…

Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of s…

Overview EN ISO 17652-2:2003 - “Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers” (CEN adoption of ISO 17652-2:2003) specifies…

Destructive tests on welds in metallic materials — Torsion test of resistance spot welds

Destructive tests on welds in metallic materials — Resistance welding — Pressure test on resistance seam welds

Textile floor coverings — Determination of thickness of machine made textile floor coverings

Tracked Changes. Simultaneous interpreting. Interpreters’ working environment. Requirements and recommendatio…

Tracked Changes. Simultaneous interpreting. Interpreters’ working environment. Requirements and recommendatio…

Welding — Test for shop primers in relation to welding and allied processes — Part 1: General requirements

Overview ISO 17652-1:2003, titled Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements, is an international standard developed by ISO in collabor…

Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds

Overview ISO 17653:2012 is an international standard published by the International Organization for Standardization (ISO) that specifies the requirements and procedures for conducting torsion tests…

Resistance welding — Welding current measurement for resistance welding — Part 4: Calibration system

Overview ISO 17657-4:2005 - "Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system" defines calibration systems and procedures for measuring welding cur…

Resistance welding — Welding current measurement for resistance welding — Part 2: Welding current meter with…

Overview ISO 17657-2:2005 specifies requirements for a welding current meter with a current sensing coil used in resistance welding. The standard defines how to measure weld time and the r.m.s. value…

Welding — Test for shop primers in relation to welding and allied processes — Part 4: Emission of fumes and g…

Overview ISO 17652-4:2003 - "Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases" specifies a laboratory method and classification for sh…

Low-alloyed steel — Determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn — Inductively coupled plasma…

Overview ISO 17650:2024 - "Low‑alloyed steel - Determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn - Inductively coupled plasma optical emission spectrometric method" - is the ISO first edit…

Resistance welding — Welding current measurement for resistance welding — Part 3: Current sensing coil

Overview ISO 17657-3:2005 specifies toroidal current sensing coils used as sensors in welding current meters and welding current measuring systems for resistance welding. The standard covers design,…

Simultaneous interpreting — Interpreters’ working environment — Part 3: Requirements and recommendations for…

Overview ISO 17651-3:2026 sets out the requirements and recommendations for the design, equipment, and operation of interpreting hubs used for simultaneous interpreting. This international standard i…

Welding — Multilingual terms for welded joints with illustrations

Overview ISO 17659:2002 - Welding - Multilingual terms for welded joints with illustrations provides clear pictorial representations and standardized terminology for common welded joints, joint prepa…

Machine-made textile floor coverings — Determination of thickness

Overview ISO 1765:1986 is an internationally recognized standard published by the International Organization for Standardization (ISO) that specifies a method for determining the thickness of machine…

Simultaneous interpreting - Interpreter’s working environment - Part 3: Requirements and recommendations for…

Overview SIST EN ISO 17651-3:2026 sets forth comprehensive requirements and recommendations for the design, equipment, and operation of interpreting hubs used for simultaneous interpreting. Developed…

Welding — Test for shop primers in relation to welding and allied processes — Part 2: Welding properties of s…

Overview - ISO 17652-2:2003 (Welding properties of shop primers) ISO 17652-2:2003 specifies laboratory tests to assess how shop primers influence weldability and the formation of weld porosity. It is…

Welding — Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts — Terminology

Overview ISO 17658:2002 - Welding - Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology defines a standardized vocabulary for imperfections that occur directly from oxy…

Simultaneous interpreting — Interpreters’ working environment — Part 2: Requirements and recommendations for…

Overview ISO 17651-2:2024 - Simultaneous interpreting - Interpreters’ working environment - Part 2: Requirements and recommendations for mobile booths provides guidance for the design, siting, instal…

Destructive tests on welds in metallic materials — Method for taking samples for delta ferrite measurement

Resistance welding — Welding current measurement for resistance welding — Part 5: Verification of welding cur…

Overview ISO 17657-5:2005 is an international standard developed by ISO, focusing on resistance welding – specifically, the verification of welding current measuring systems. This part of the ISO 176…

Resistance welding — Destructive tests of welds — Pressure test of resistance seam welds

ISO 17654:2011 Overview ISO 17654:2011 is an international standard published by the International Organization for Standardization (ISO) that defines the pressure test method for resistance seam wel…

Welding — Test for shop primers in relation to welding and allied processes — Part 3: Thermal cutting

Overview ISO 17652-3:2003 specifies a laboratory test method to determine how a shop primer affects the maximum usable speed for thermal cutting processes. The procedure quantifies the primer's impac…

Welding. Multilingual terms for welded joints with illustrations.

Low-alloyed steel. Determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn. Inductively coupled plasma o…

Welding. Test for shop primers in relation to welding and allied processes. General requirements.