Поиск

Rheology. Vocabulary and symbols for rotational and oscillatory rheometry.

Fasteners. Acceptance inspection.

Document management. Electronic document file format for long-term preservation. Use of ISO 32000-2 (PDF/A-4).

Non-destructive testing. Characteristics of focal spots in industrial X-ray systems. Pinhole camera radiograp…

Rolling bearings. Cast and pressed housings for insert bearings. Boundary dimensions and tolerances.

Iron ores for blast furnace and direct reduction feedstocks. Determination of the tumble and abrasion indices.

Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometri…

Sustainable finance. Guidance on the application of sustainability principles for organizations in the financ…

Document management. Portable document format. PDF 1.7.

Transaction assurance in E-commerce. Guidelines on sharing goods quality assurance traceability information i…

Transaction assurance in E-commerce. Vocabulary.

Document management applications. Raster image transport and storage. Use of ISO 32000 (PDF/R-1).

Extenders. Specifications and methods of test. Natural talc, in lamellar form, containing carbonates.

Extenders. Specifications and methods of test. Fumed silica.

Forged steel eyebolts grade 4 for general lifting purposes — Amendment 1

Overview ISO 3266:2010/Amd 1:2015 is an important amendment to the international standard governing forged steel eyebolts, grade 4, used for general lifting purposes. Maintained by the International…

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems - Part 3: Measurement of…

Overview SIST EN ISO 32543-5:2026, Non-destructive testing - Characteristics of focal spots in industrial X-ray systems - Part 3: Measurement of the effective focal spot size of mini and micro focus…

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems - Part 3: Measurement of…

Overview EN ISO 32543-3:2026, Non-destructive testing - Characteristics of focal spots in industrial X-ray systems - Part 3: Measurement of the effective focal spot size of mini and micro focus X-ray…

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems - Part 2: Edge method wi…

Overview EN ISO 32543-2:2026 provides a standardized procedure for the measurement of effective focal spot dimensions greater than 0.2 µm in industrial X-ray systems using the edge method with hole o…

Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma s…

Overview EN ISO 32679:2025 (identical to ISO 32679:2024) is a CEN/ISO standard for non‑destructive testing (NDT) by radiographic methods to determine the physical size of industrial gamma radiography…

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems - Part 1: Pinhole camera…

Overview EN ISO 32543-1:2025 (ISO 32543-1:2024) specifies the pinhole camera radiographic method for measuring effective focal spot dimensions of industrial X‑ray tubes. It applies to effective focal…

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurem…

Overview EN ISO 3210:2025 - "Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)"…

Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurem…

Overview EN ISO 3210:2025 - "Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)"…

Non-destructive testing - Characteristics of focal spots in industrial X-ray systems - Part 1: Pinhole camera…

Overview EN ISO 32543-1:2025 (ISO 32543-1:2024) specifies the pinhole camera radiographic method for measuring effective focal spot dimensions of industrial X‑ray tubes. It applies to effective focal…

Non-destructive testing - Radiographic testing - Determination of the size of industrial radiographic gamma s…

Overview EN ISO 32679:2025 (identical to ISO 32679:2024) is a CEN/ISO standard for non‑destructive testing (NDT) by radiographic methods to determine the physical size of industrial gamma radiography…

Information and documentation - International standard serial number (ISSN)

Overview SIST ISO 3297:2024 - Information and documentation - International standard serial number (ISSN) defines the ISSN as the internationally recognized, numeric identifier for serials and other…

Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10…

Overview SIST EN ISO 3262-10:2024 defines the specifications and test methods for extenders based on natural talc/chlorite in lamellar form. As part of the ISO 3262 series, this standard provides key…

Extenders - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2024)

Overview EN ISO 3262-17:2024 - Extenders: Precipitated calcium silicate (CEN, ISO/TC 256) specifies requirements and corresponding test methods for precipitated calcium silicate used as an extender/f…

Extenders - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonat…

Overview EN ISO 3262-11:2024 / ISO 3262-11:2024 specifies requirements and test methods for products made from naturally occurring talc in lamellar form containing carbonates (for example dolomite an…

Extenders - Specifications and methods of test - Part 17: Precipitated calcium silicate (ISO 3262-17:2024)

Overview EN ISO 3262-17:2024 - Extenders: Precipitated calcium silicate (CEN, ISO/TC 256) specifies requirements and corresponding test methods for precipitated calcium silicate used as an extender/f…

Extenders - Specifications and methods of test - Part 11: Natural talc, in lamellar form, containing carbonat…

Overview EN ISO 3262-11:2024 / ISO 3262-11:2024 specifies requirements and test methods for products made from naturally occurring talc in lamellar form containing carbonates (for example dolomite an…

Extenders - Specifications and methods of test - Part 10: Natural talc/chlorite in lamellar form (ISO 3262-10…

Overview EN ISO 3262-10:2024 defines the specifications and test methods for extenders based on natural talc/chlorite in lamellar form. As part of the ISO 3262 series, this standard provides key requ…

Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18…

Overview SIST EN ISO 3262-18:2023 provides internationally harmonized specifications and standardized test methods for precipitated sodium aluminium silicate, an important industrial extender. As Par…

Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2023)

Overview EN ISO 3262-14:2023 (ISO 3262-14:2023) specifies requirements and test methods for cristobalite used as an extender (filler) in pigments and related raw materials. Adopted by CEN as a Europe…

Extenders - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:2023)

Overview SIST EN ISO 3262-7:2023 is the Slovenian adoption of the international standard ISO 3262-7:2023, prepared by the International Organization for Standardization (ISO) and adopted by the Europ…

Extenders - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:2023)

Overview EN ISO 3262-9:2023 - Extenders: Calcined clay specifies the requirements and corresponding test methods for calcined clay used as an extender (filler). Published by CEN and identical to ISO…

Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)

Overview EN ISO 3262-3:2023 - "Extenders - Specifications and methods of test - Part 3: Blanc fixe" is the CEN/ISO standard that specifies requirements and test methods for blanc fixe (precipitated b…

Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)

Overview EN ISO 3262-22:2023 - Extenders: Specifications and methods of test - Part 22: Flux‑calcined kieselguhr (ISO 3262-22:2023) specifies quality requirements and laboratory test methods for flux…

Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2022)

Overview EN ISO 3262-4:2023 (CEN adoption of ISO 3262-4:2023) specifies the requirements and corresponding test methods for whiting, a natural calcium carbonate (chalk) used as an extender in paints,…

Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262…

Overview SIST EN ISO 3262-2:2023, titled Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:2023), defines the requirements and testing me…

Extenders - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:20…

Overview EN ISO 3262-5:2023 - "Extenders - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate" is a CEN-endorsed ISO standard that specifies requirements and test meth…

Extenders - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2023)

Overview EN ISO 3262-12:2023 (ISO 3262-12:2023) specifies requirements and corresponding methods of test for muscovite-type mica as an extender (filler) material. Published by ISO in cooperation with…

Extenders - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:…

Overview SIST EN ISO 3262-21:2023 - Extenders – Specifications and Methods of Test – Part 21: Silica Sand (Unground Natural Quartz) is a European standard developed by CEN that outlines comprehensive…

Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18…

Overview EN ISO 3262-18:2023 / ISO 3262-18:2023 specifies requirements and corresponding methods of test for precipitated sodium aluminium silicate, a specialty extender used in pigments and extender…

Extenders - Specifications and methods of test - Part 7: Dolomite (ISO 3262-7:2023)

Overview EN ISO 3262-7:2023 (adopted by CEN as EN ISO 3262-7:2023) specifies requirements and corresponding methods of test for dolomite used as an extender. This second edition replaces the 1998 ver…

Extenders - Specifications and methods of test - Part 9: Calcined clay (ISO 3262-9:2023)

Overview EN ISO 3262-9:2023 - Extenders: Calcined clay specifies the requirements and corresponding test methods for calcined clay used as an extender (filler). Published by CEN and identical to ISO…

Extenders - Specifications and methods of test - Part 14: Cristobalite (ISO 3262-14:2023)

Overview EN ISO 3262-14:2023 (ISO 3262-14:2023) specifies requirements and test methods for cristobalite used as an extender (filler) in pigments and related raw materials. Adopted by CEN as a Europe…

Extenders - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2023)

Overview SIST EN ISO 3262-15:2023 – Extenders – Specifications and Methods of Test – Part 15: Vitreous Silica is an international standard developed by CEN and ISO for specifying the requirements and…

Extenders - Specifications and methods of test - Part 13: Natural quartz (ground) (ISO 3262-13:2023)

Overview EN ISO 3262-13:2023 (Extenders - Part 13: Natural quartz (ground)) is a CEN-adopted ISO standard that specifies requirements and test methods for ground natural quartz used as an extender (f…

Extenders - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2023)

Overview SIST EN ISO 3262-16:2023 is the latest European and international standard specifying the requirements and test methods for aluminium hydroxides used as extenders in various industries. Publ…

Extenders - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:2023)

Overview SIST EN ISO 3262-8:2023 - Extenders - Specifications and Methods of Test - Part 8: Natural Clay is an internationally recognized European standard developed by CEN and ISO. This standard spe…

Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)

Overview EN ISO 3262-22:2023 - Extenders: Specifications and methods of test - Part 22: Flux‑calcined kieselguhr (ISO 3262-22:2023) specifies quality requirements and laboratory test methods for flux…

Extenders - Specifications and methods of test - Part 12: Muscovite-type mica (ISO 3262-12:2023)

Overview EN ISO 3262-12:2023 (ISO 3262-12:2023) specifies requirements and corresponding methods of test for muscovite-type mica as an extender (filler) material. Published by ISO in cooperation with…

Extenders - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:2023)

Overview EN ISO 3262-2:2023 - Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) is a harmonized CEN/ISO standard that specifies composition requireme…

Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)

Overview EN ISO 3262-3:2023 - "Extenders - Specifications and methods of test - Part 3: Blanc fixe" is the CEN/ISO standard that specifies requirements and test methods for blanc fixe (precipitated b…

Extenders - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate (ISO 3262-5:20…

Overview EN ISO 3262-5:2023 - "Extenders - Specifications and methods of test - Part 5: Natural crystalline calcium carbonate" is a CEN-endorsed ISO standard that specifies requirements and test meth…

Extenders - Specifications and methods of test - Part 4: Whiting (ISO 3262-4:2023)

Overview EN ISO 3262-4:2023 (CEN adoption of ISO 3262-4:2023) specifies the requirements and corresponding test methods for whiting, a natural calcium carbonate (chalk) used as an extender in paints,…

Extenders - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2023)

Overview EN ISO 3262-16:2023 is the latest European and international standard specifying the requirements and test methods for aluminium hydroxides used as extenders in various industries. Published…

Extenders - Specifications and methods of test - Part 15: Vitreous silica (ISO 3262-15:2023)

Overview EN ISO 3262-15:2023 – Extenders – Specifications and Methods of Test – Part 15: Vitreous Silica is an international standard developed by CEN and ISO for specifying the requirements and test…

Extenders - Specifications and methods of test - Part 21: Silica sand (unground natural quartz) (ISO 3262-21:…

Overview EN ISO 3262-21:2023 - Extenders – Specifications and Methods of Test – Part 21: Silica Sand (Unground Natural Quartz) is a European standard developed by CEN that outlines comprehensive requ…

Extenders - Specifications and methods of test - Part 8: Natural clay (ISO 3262-8:2023, Corrected version 202…

Overview EN ISO 3262-8:2023 - Extenders - Specifications and Methods of Test - Part 8: Natural Clay is an internationally recognized European standard developed by CEN and ISO. This standard specifie…