Мы хотим включить аналитику посещений, чтобы понимать, что искать людям на сайте. Без вашего согласия счётчики не загружаются. Политика конфиденциальности
Найдено: 60+
1 Scope This International Standard provides minimum requirements for parts lists to provide necessary information, e.g. for the production, procurement or maintenance of the parts. This Internationa…
1 Scope This part of ISO 7588 specifies dimensional characteristics and the functional allocation of relay and flasher terminals intended for road vehicles. Annex A gives additional information on th…
1 Scope This part of ISO 7588 specifies dimensional characteristics of electronic devices intended for road vehicles. Annex A gives additional information on the dimensions of socket apertures and an…
1 Scope This part of ISO 7588 specifies dimensional characteristics and the functional allocation of microrelay terminals intended for road vehicles. Annex A gives additional information on the dimen…
Overview ISO 7539-6:2018/Amd 1:2024 is an important amendment to the international standard focusing on stress corrosion testing of metals and alloys. Specifically, it addresses the preparation and u…
Overview ISO 7513:1990/Amd 1:2012 is an international standard developed by the International Organization for Standardization (ISO) that specifies the method for determining the moisture content in…
Overview ISO 7531:1987 - "Wire rope slings for general purposes - Characteristics and specifications" defines design, identification, manufacture and rating rules for general-purpose wire rope slings…
Overview EN ISO 75-3:2025 - Plastics: Determination of temperature of deflection under load, Part 3 - specifies a laboratory method to measure the temperature of deflection under load for high‑streng…
Overview EN ISO 7533:2024 / ISO 7533:2024 defines a practical, organisation-neutral method to identify specifications in technical product documentation (TPD). The standard provides rules, graphical…
Overview SIST ISO 7503-1:2025 - Measurement of radioactivity: Measurement and evaluation of surface contamination - Part 1: General principles provides high-level guidance for assessing radioactive c…
Overview SIST ISO 7503-2:2025 - Measurement of radioactivity: Measurement and evaluation of surface contamination - Part 2 describes an indirect test method using wipe-test samples to evaluate remova…
Overview SIST EN ISO 7539-6:2018/A1:2024 is an amendment to the international standard focusing on the corrosion of metals and alloys, specifically targeting stress corrosion testing. This Part 6 of…
Overview EN ISO 7539-6:2018/A1:2024 is an amendment to the international standard focusing on the corrosion of metals and alloys, specifically targeting stress corrosion testing. This Part 6 of the I…
Overview EN ISO 7510:2024 - Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017) - specifies a laboratory method to quan…
Overview EN ISO 7551:2023 - Dentistry - Endodontic absorbent points - is the current CEN-adopted version of ISO 7551 (published May 2023). The standard specifies requirements and test methods for ste…
Overview SIST ISO 7507-2:2023 is an international standard developed by the International Organization for Standardization (ISO) that outlines procedures for the calibration of vertical cylindrical s…
Overview EN ISO 7539-9:2021 / ISO 7539-9:2021 - "Corrosion of metals and alloys - Stress corrosion testing - Part 9" defines procedures for the preparation and use of pre-cracked specimens for stress…
Overview EN ISO 7540:2020 specifies requirements for ground sweet and hot paprika obtained from Capsicum annuum L. and Capsicum frutescens L. It defines sensory, physical and chemical specifications,…
Overview EN ISO 7541:2020 - "Spices and condiments - Spectrophotometric determination of the extractable colour in paprika" is a CEN-endorsed ISO method for measuring the colour strength of ground pa…
Overview EN ISO 7539-10:2020 (ISO 7539-10:2020) specifies the reverse U-bend (RUB) method for stress corrosion testing of metals and alloys. The standard defines procedures for designing, preparing a…
Overview EN ISO 7526:2020 specifies an infrared absorption method after induction‑furnace combustion for the determination of sulfur content in ferronickels. The method covers sulfur mass fractions f…
Overview EN ISO 75-1:2020 - Plastics: Determination of temperature of deflection under load (general test method) defines a standardized laboratory procedure to measure the temperature at which a pla…
Overview EN ISO 7539-6:2018 - "Corrosion of metals and alloys - Stress corrosion testing - Part 6" (Corrected version 2018-11) is a CEN-endorsed ISO standard that specifies procedures for the design,…
Overview EN ISO 7590:2018 - Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (ISO 7590:2018) is a CEN-endorsed international standard (published July 2…
Overview EN ISO 7500-1:2018 - "Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of t…
Overview EN ISO 7599:2018 - "Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium" (ISO 7599:2018) is a CEN-endorsed internat…
Overview SIST ISO 7504:2016 - Gas analysis - Vocabulary is an international standard that defines terminology used in gas analysis, with a primary focus on calibration gas mixtures used for gas measu…
Overview - ISO 7530-1:2015 (Nickel alloys, FAAS analysis) ISO 7530-1:2015 specifies flame atomic absorption spectrometric (FAAS) methods for the determination of cobalt, chromium, copper, iron and ma…
Overview EN ISO 7539-11:2014 / ISO 7539-11:2013 provides guidance for designing and conducting laboratory tests to evaluate the resistance of metals and alloys to hydrogen embrittlement and hydrogen‑…
Overview EN ISO 7539-1:2012 (ISO 7539-1:2012) provides general guidance on stress corrosion testing for metals and alloys. Published by CEN/ISO, this Part 1 describes the general considerations to be…
Overview EN ISO 75-2:2013 - "Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite" is the CEN-adopted version of ISO 75-2:2013. It specifies laboratory meth…
Overview SIST ISO 7507-4:2010 - "Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 4: Internal electro‑optical distance‑ranging method" specifies a standardiz…
Overview ISO 7573:2008 - Technical product documentation - Parts lists - defines minimum requirements for creating clear, consistent parts lists used for production, procurement and maintenance. The…
Overview EN ISO 7579:2009 - "Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods" (CEN adoption of ISO 7579:2009) specifies two validated laboratory meth…
Overview ISO 7507-3:2006 - "Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 3: Optical‑triangulation method" specifies an optical‑triangulation procedure fo…
Overview EN ISO 7539-8:2008 - "Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments" provides guidance on preparing, selecting an…
Overview EN ISO 7500-2:2006 - "Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force" specifies how to ver…
Overview ISO 7507-1:2003 - "Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 1: Strapping method" defines the strapping method for calibrating substantially…
Overview ISO 7507-5:2000 specifies an external electro‑optical distance‑ranging (EODR) method for the calibration of non‑insulated vertical cylindrical storage tanks used for petroleum and liquid pet…
Overview SIST EN ISO 7539-7:2005, titled Corrosion of metals and alloys - Stress corrosion testing - Part 7: Method for slow strain rate testing, is a critical European Standard developed by CEN, har…