Overview
EN ISO 22568-2:2019 - Foot and leg protectors: Requirements and test methods for footwear component - Part 2: Non-metallic toecaps specifies performance requirements and test methods for non-metallic toecaps intended as components of PPE footwear (for example under ISO 20345 and ISO 20346). Endorsed by CEN in 2019 and superseding EN 12568:2010, this standard allows manufacturers, test laboratories and specifiers to demonstrate the impact, compression and environmental performance of internal non‑metallic toecaps before they are incorporated into safety footwear.
Key topics and requirements
- Scope and definitions: Covers internal non‑metallic toecaps (not external designs) used to protect against mechanical impact and compression.
- Two toecap types: Defines Type A and Type B constructions to accommodate different footwear builds.
- Physical and visual requirements: Finishing criteria to ensure toecaps are free from surface defects and suitable for incorporation into uppers.
- Dimensions: Required measurements such as internal length and width of flange (sample preparation and reporting).
- Mechanical performance:
- Impact resistance - specified test methods and reporting requirements.
- Compression resistance - procedures and acceptance criteria for load-bearing performance.
- Environmental stability: Tests for ageing and environmental influence, including effects of high/low temperature and fuel oil exposure, with post-treatment impact testing.
- Sampling and reporting: Typical requirement is one sample each size, right and left for each test (see Table 1 in the standard); detailed test reports are required.
- Marking: Requirements for toecap identification and traceability for integration into PPE footwear.
Applications
EN ISO 22568-2:2019 is used to:
- Validate non‑metallic toecap designs during product development.
- Provide component-level certification evidence for compliance with PPE footwear standards (ISO 20345/20346).
- Support quality control and batch testing in manufacturing.
- Inform procurement specifications for safety footwear components.
- Guide independent test laboratories in standardized test execution and reporting.
Who uses this standard
- Toecap manufacturers (design, R&D, quality teams)
- Safety footwear manufacturers and assemblers
- Accredited testing laboratories and certification bodies
- Product compliance engineers, safety officers and procurement managers
Related standards
EN ISO 22568-2:2019 provides a clear, component‑level framework to assess non‑metallic toecap safety, enabling consistent testing and reliable integration into certified PPE footwear.