SIST ISO 5782-1:2023 PDF

Pneumatic fluid power - Compressed air filters - Part 1: Main characteristics to be included in supplier's literature and product-marking requirements

Название (английский):

SIST ISO 5782-1:2023

Pneumatic fluid power - Compressed air filters - Part 1: Main characteristics to be included in supplier's literature and product-marking requirements

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 13 марта 2023 г.
Издание:: ISO IS 5782 edition 3 version 1
ICS:: 23.100.60

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

ISO 5782-1:2017 specifies which characteristics of compressed air filters are to be included in the supplier's literature. It also specifies product-marking requirements. ISO 5782-1:2017 is applicable to compressed air filters, constructed from light alloys (aluminium, etc.), zinc diecast alloys, brass, steel and plastic, with a rated pressure of up to 1 600 kPa (16 bar) and a maximum temperature of 80 °C, designed to remove solid and liquid contaminants from compressed air by mechanical means

Технические детали

Технический комитет: IHPV - Hydraulics and pneumatics
SKU: SIST ISO 5782-1:2023

Abstract

Overview - ISO 5782-1:2017 (Compressed air filters)

ISO 5782-1:2017 is an international standard for pneumatic fluid power - compressed air filters that defines the main characteristics manufacturers must include in supplier literature and the required product marking. It applies to mechanically constructed compressed air filters (aluminium, zinc diecast, brass, steel, plastic) rated up to 1 600 kPa (16 bar) and maximum 80 °C, designed to remove solid and liquid contaminants from compressed air.

Key topics and technical requirements

The standard specifies the minimum descriptive and marking information to help users select and use compressed air filters safely and consistently:

General characteristics
- Mandatory general dimensions (Figure 1 style) and port/interface forms (ISO 16030, ISO 7‑1 or Annex A).
- Rated pressure classification per ISO 2944 and verification per ISO 5782‑2.
- Declared operating temperature range and alternate ratings when applicable.
Performance and selection data
- Pressure drop vs air flow rate measured at inlet pressures of 250, 630 and 1 000 kPa (or rated pressure), reported per ISO 5782‑2 in graphical or tabular form.
- Useful retention capacity of reservoirs measured per ISO 5782‑2.
- Draining device types (manual, automatic, etc.) and minimum pressure for drain operation.
- Materials of construction (body, internals, elastomers, bowl).
Optional filter efficiency
- Ability to report particulate filtration efficiency (fine 0.01–

Overview - ISO 5782-1:2017 (Compressed air filters)

Key topics and technical requirements

The standard specifies the minimum descriptive and marking information to help users select and use compressed air filters safely and consistently:

General characteristics
- Mandatory general dimensions (Figure 1 style) and port/interface forms (ISO 16030, ISO 7‑1 or Annex A).
- Rated pressure classification per ISO 2944 and verification per ISO 5782‑2.
- Declared operating temperature range and alternate ratings when applicable.
Performance and selection data
- Pressure drop vs air flow rate measured at inlet pressures of 250, 630 and 1 000 kPa (or rated pressure), reported per ISO 5782‑2 in graphical or tabular form.
- Useful retention capacity of reservoirs measured per ISO 5782‑2.
- Draining device types (manual, automatic, etc.) and minimum pressure for drain operation.
- Materials of construction (body, internals, elastomers, bowl).
Optional filter efficiency
- Ability to report particulate filtration efficiency (fine 0.01–

SIST ISO 5782-1:2023 PDF

Технические детали

Abstract

Overview - ISO 5782-1:2017 (Compressed air filters)

Key topics and technical requirements

Похожие стандарты

Abstract

Overview - ISO 5782-1:2017 (Compressed air filters)

Key topics and technical requirements

Похожие стандарты

Pneumatic fluid power — Compressed air filters — Part 1: Main characteristics to be included in supplier's li…

Pneumatic fluid power. Connections. Ports and stud ends.

Wheelchairs - Lithium-ion battery systems and chargers for powered wheelchairs. Requirements and test methods

Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of mouldin…

Pneumatic fluid power -- Compressed-air filters -- Part 2: Test methods to determine the main characteristics…