ISO 10041-1-2010 PDF
Name in English:
St ISO 10041-1-2010
Name in Russian:
Ст ISO 10041-1-2010
Original standard ISO 10041-1-2010 in PDF full version. Additional info + preview on request
Full title and description
ISO 10041-1:2010 — Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 1: Main characteristics to include in the supplier's literature. This part defines which product characteristics manufacturers and suppliers should publish for electro-pneumatic continuous flow control valves (valves that generally exhaust to atmosphere), to enable selection, comparison and correct application.
Abstract
ISO 10041-1:2010 specifies the characteristics of electro‑pneumatic continuous flow control valves that are to be included in the supplier’s literature. It is limited to valves that exhaust to atmosphere (with specified exception of two‑port valves). The aim is to standardize the information suppliers provide so users can compare and apply valves correctly.
General information
- Status: Published (international standard; confirmed at review).
- Publication date: October 2010 (Edition 1, 2010-10).
- Publisher: International Organization for Standardization (ISO).
- ICS / categories: 23.100.50 (Control components / Pneumatic fluid power).
- Edition / version: Edition 1 (2010).
- Number of pages: 14 pages (official ISO record).
Details above are taken from the ISO bibliographic record and life‑cycle information for ISO 10041‑1:2010. The publication was last reviewed and confirmed in 2021, so this edition remains current.
Scope
ISO 10041-1:2010 defines the principal product characteristics that suppliers must include in literature for electro‑pneumatic continuous flow control valves. It applies to characterization of valves that exhaust to atmosphere and excludes two‑port valve cases specified in the text. The scope is focused on standardizing descriptive and performance information (naming, functional description, key performance parameters) to facilitate selection and comparison.
Key topics and requirements
- List of main characteristics that must appear in supplier literature (identification, functional type, port configuration, flow characteristics, operating pressure range, electrical control data, materials and environmental/installation limits).
- Definition of which valve types are covered (electro‑pneumatic continuous flow control valves exhausting to atmosphere; two‑port valve exceptions noted).
- Standardized presentation format to make specification and comparison between manufacturers practical and consistent.
- Cross‑reference to required test methods and presentation of test results (see companion Part 2 for test procedures).
Typical use and users
Primary users are valve and component manufacturers (for supplier documentation), pneumatic system designers and integrators (for component selection), procurement/specification engineers, test laboratories and conformity assessors. Technical authors and product managers use the standard to prepare datasheets and catalogues that give consistent, comparable valve information.
Related standards
ISO 10041 is published in multiple parts; the most directly related document is ISO 10041-2:2010 (Part 2 — test methods to determine the main characteristics to include in supplier literature). Other related ISO standards in pneumatic fluid power and flow characterization include ISO 6358 (determination of flow‑rate characteristics for components using compressible fluids) and ISO 5598 (fluid power vocabulary). These documents are typically referenced together when specifying, testing and documenting pneumatic components.
Keywords
electro‑pneumatic, continuous flow control valve, supplier literature, datasheet, pneumatic fluid power, flow characteristics, test methods, ISO/TC 131/SC 5, ICS 23.100.50.
FAQ
Q: What is this standard?
A: ISO 10041-1:2010 is an ISO international standard that specifies the main product characteristics manufacturers should include in supplier literature for electro‑pneumatic continuous flow control valves.
Q: What does it cover?
A: It covers the descriptive and performance characteristics to be provided in datasheets and supplier literature for electro‑pneumatic continuous flow control valves that exhaust to atmosphere (with the two‑port exclusion described in the text). Test methods to determine those characteristics are provided in the companion Part 2.
Q: Who typically uses it?
A: Valve manufacturers, product managers, technical writers, pneumatic system designers, procurement/specification engineers and test laboratories—anyone who needs consistent, comparable product information for electro‑pneumatic valves.
Q: Is it current or superseded?
A: This edition (ISO 10041‑1:2010, Edition 1) was published October 2010 and was last reviewed and confirmed by ISO in 2021; the ISO bibliographic record shows it remains published/confirmed and therefore current. For the latest status always check the ISO catalogue record or your national standards body.
Q: Is it part of a series?
A: Yes — ISO 10041 is published in at least two parts. Part 1 defines the supplier literature characteristics (this document) and Part 2 (ISO 10041‑2:2010) defines the test methods to determine those characteristics.
Q: What are the key keywords?
A: electro‑pneumatic, continuous flow control valve, supplier literature, datasheet, flow characteristics, pneumatic fluid power, test methods, ISO/TC 131/SC 5, ICS 23.100.50.