ISO 10295-2-2009 cor1-2009 PDF

Full title and description

ISO 10295-2:2009/Cor 1:2009 — Fire tests for building elements and components — Fire testing of service installations — Part 2: Linear joint (gap) seals — Technical Corrigendum 1. A one-page technical corrigendum that amends and corrects specific items in the published Part 2 test method (ISO 10295-2:2009) for linear joint (gap) seals used in service installations.

Abstract

This corrigendum provides corrections to ISO 10295-2:2009, which specifies heating conditions, test methods and pass/fail criteria for assessing the ability of linear joint (gap) seals to maintain fire integrity and thermal insulation of fire-separating elements at the sealed joint. The corrigendum clarifies and corrects wording, reference numbers, and one or more technical details in the original Part 2 text so that the standard can be applied consistently by test laboratories, manufacturers and specifiers.

General information

• Status: Published / Current (corrigendum to ISO 10295-2:2009)
• Publication date: 30 March 2009 (catalogue entry also shown as April 2009)
• Publisher: International Organization for Standardization (ISO)
• ICS / categories: 13.220.50 (Fire-resistance of building materials and elements); 91.140.01 (Installations in buildings in general)
• Edition / version: Edition 1 — Corrigendum 1 (2009)
• Number of pages: 1

Scope

This technical corrigendum applies to ISO 10295-2:2009 and is limited to correcting, clarifying or updating specific provisions of that part. ISO 10295-2:2009 itself specifies the heating conditions, methods of test and evaluation criteria for linear joint (gap) seals used to maintain the fire integrity and thermal insulation of fire-separating elements. The corrigendum does not change the overall scope of the Part 2 test method but ensures the original text is correct and unambiguous for users and test laboratories.

Key topics and requirements

• Corrections and clarifications to the published Part 2 text (wording, clause cross-references, table/figure labels or minor numeric values).
• Reinforcement of the test’s purpose: assessment of integrity and insulation performance of linear joint seals under standard fire exposure and under induced movement where applicable.
• Confirmation of test apparatus and furnace heating regime consistent with ISO 10295 series requirements (standard fire curve and measurement points).
• Definition of specimen preparation, joint width conditions (including guidance where joint width > 20 mm and movement is simulated), and mounting details required for reproducible testing.
• Evaluation criteria for integrity (flaming, opening) and insulation (temperature rise limits) and required observation/reporting items during the test.
• Limitations: not intended to quantify smoke leakage rates or to replace specialised test procedures for products already covered by other standards (for example doors, ducts and cable penetrations where separate methods exist).

Typical use and users

Primary users are fire test laboratories, manufacturers and suppliers of linear joint and gap sealing products, product certification bodies, building code authorities, fire safety engineers, and specifiers preparing fire performance documentation. The corrigendum is used by laboratories and manufacturers to ensure tests and reports for ISO 10295-2:2009 are performed and interpreted against the corrected normative text.

Related standards

Relevant documents and neighbouring parts in the ISO 10295 family and other fire test standards typically referenced alongside this corrigendum include: ISO 10295-2:2009 (the amended main document), ISO 10295-1:2007 (Penetration seals), ISO/TR 10295-3 (guidance on construction and use of test configurations and simulated services), and general fire-resistance test references such as the standard fire time–temperature curve and laboratory practice standards used by fire test houses. National and regional equivalents/adoptions (for example identical national adoptions) may also apply.

Keywords

ISO 10295, corrigendum, linear joint seals, gap seals, fire test, fire resistance, service installations, integrity, insulation, test method, furnace, movement simulation, fire-separating elements.

FAQ

Q: What is this standard?

A: This is a one-page technical corrigendum (ISO 10295-2:2009/Cor 1:2009) that corrects and clarifies specific items in the ISO 10295-2:2009 standard for fire testing of linear joint (gap) seals used in service installations.

Q: What does it cover?

A: It provides corrections to the original Part 2 text; ISO 10295-2:2009 (the main document) covers furnace heating conditions, specimen preparation, test procedures and criteria for assessing the integrity and thermal insulation performance of linear joint/gap seals under fire exposure, including cases with induced movement.

Q: Who typically uses it?

A: Fire test laboratories, manufacturers of joint-sealing products, certification and compliance bodies, fire safety engineers, building regulators and specifiers use the corrigendum to ensure the Part 2 test method is applied correctly.

Q: Is it current or superseded?

A: The corrigendum is a correction to the 2009 edition of ISO 10295-2. It remains the published correction to that edition; users should check the ISO catalogue or their national standards body for any later revisions or newer editions replacing ISO 10295-2:2009.

Q: Is it part of a series?

A: Yes — it amends Part 2 of the ISO 10295 series (which also includes Part 1: penetration seals and associated technical reports providing guidance for test configuration and use).

Q: What are the key keywords?

A: Linear joint seals, gap seals, fire test, fire-resistance, integrity, insulation, ISO 10295, service installations, corrigendum.