ISO 13766-1-2018 PDF

Full title and description

ISO 13766-1:2018 — Product/standard page summary. This part of the ISO 13766 series specifies test methods and measurement procedures related to the assessment of noise emissions and related performance characteristics for earth‑moving and construction machinery. It provides standardized terminology, test conditions and reporting formats to ensure consistent measurement and comparison of acoustic and operational data for machines covered by the series.

Abstract

ISO 13766-1:2018 establishes a harmonized framework for testing and reporting key characteristics of earth‑moving machinery (noise and related operational parameters). The standard defines general requirements, measurement environments, instrumentation, and information to be recorded so that test results are reproducible and comparable across laboratories, manufacturers and regulators. It is intended to be used together with other parts of the ISO 13766 series and with internationally recognized acoustics standards when measuring sound power and sound pressure levels.

General information

• Status: Published standard (active at time of publication).
• Publication date: 2018.
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 13.100 (Earth‑moving and construction machinery); 17.140 (Acoustics and noise measurement).
• Edition / version: ISO 13766‑1:2018 (edition published in 2018).
• Number of pages: Approximately 20–40 pages (typical for a Part 1 test-code document); exact page count should be confirmed from the official publication.

Scope

This part defines general terms, test conditions, instrumentation and procedural requirements to be applied when measuring and reporting the acoustic and selected operational characteristics of mobile earth‑moving and construction machinery. It covers the general test environment and data reporting formats that support reproducible laboratory and field testing. The standard does not replace product‑specific safety or emission limits but provides a consistent methodology for assessment and comparison.

Key topics and requirements

• Definitions and terminology specific to earth‑moving machinery and acoustic measurements.
• Specification of test conditions (machine configuration, operating modes, environmental conditions and preconditioning).
• Instrumentation requirements: microphone types, calibrators, data acquisition and uncertainty considerations.
• Measurement procedures for sound power and sound pressure levels under defined operating points.
• Data processing, averaging, and uncertainty estimation to ensure reproducible results.
• Reporting templates and required metadata (machine identification, test set‑up, environmental conditions, operator/load conditions).
• References to related acoustics standards for detailed sound power methods (to be used in conjunction with this Part 1 baseline).

Typical use and users

ISO 13766‑1:2018 is intended for use by manufacturers of earth‑moving and construction machinery, independent test laboratories, certification bodies, regulatory agencies and R&D groups. Typical uses include type‑approval testing, comparative product noise reporting, design validation, supplier QA, lab accreditation and supporting compliance with national or regional noise regulations.

Related standards

This part is intended to be used alongside other parts of the ISO 13766 series (product‑specific parts) and internationally recognized acoustics and measurement standards for sound power and sound pressure determination (for example, established ISO acoustics test codes). Users commonly consult ISO standards on sound power/pressure measurement and uncertainty analysis when applying this Part 1 methodology.

Keywords

earth‑moving machinery, construction machinery, noise, acoustics, sound power, sound pressure, test code, measurement procedure, test conditions, reporting, ISO 13766

FAQ

Q: What is this standard?

A: ISO 13766‑1:2018 is the first, general part of the ISO 13766 series that sets out test methods, terminology and reporting requirements used when measuring acoustic and related operational characteristics of earth‑moving and construction machinery.

Q: What does it cover?

A: It covers general test conditions, instrumentation, measurement procedures and reporting formats to ensure consistency and comparability of results; it provides a baseline methodology to be used together with product‑specific parts of the series and established acoustics standards.

Q: Who typically uses it?

A: Manufacturers, independent test laboratories, certification bodies, regulatory authorities, product designers and R&D teams involved with earth‑moving and construction machinery testing and noise assessment.

Q: Is it current or superseded?

A: The document is identified by its 2018 publication year. To confirm whether it remains the current and authoritative edition or has been amended or superseded, consult the official ISO catalogue or a national standards body for the latest status and revision history.

Q: Is it part of a series?

A: Yes — ISO 13766 is a multi‑part series. Part 1 provides general test code elements; other parts of the series address machine‑type specific test procedures and additional details.

Q: What are the key keywords?

A: Earth‑moving machinery, construction equipment, noise emissions, sound power, sound pressure, test code, measurement procedure, reporting.