ISO 2328-1977 rus PDF

Full title and description

St ISO 2328-1977 rus — Russian-language edition/translation of ISO 2328:1977, titled "Fork lift trucks — Hook-on type fork arms and fork carriers — Mounting dimensions". The document specifies mounting interface dimensions for hook-on type fork arms and their carriers to permit interchangeability between manufacturers and models.

Abstract

This standard (Russian version of ISO 2328:1977) defines the key mounting dimensions, tolerances and related requirements for hook-on type fork arms and fork arm carriers used on fork-lift trucks. Its purpose is to ensure mechanical compatibility and safe interchangeability of fork arms and attachments across trucks of defined rated capacities.

General information

• Status: Withdrawn (original 1977 edition withdrawn; later revisions published).
• Publication date: October 1977 (Edition 1).
• Publisher: International Organization for Standardization (ISO); Russian-language edition/translation distributed by national bodies or third-party distributors.
• ICS / categories: 53.060 (Industrial trucks and tractors; fork-lift trucks).
• Edition / version: Edition 1 (1977) — national Russian edition/translation of that 1977 text. (The ISO series was later revised; see Related standards.)
• Number of pages: 4 pages (original ISO 1977 publication).

Scope

The scope covers mounting dimensions and essential additional requirements for hook-on type fork arms and their carriers on fork-lift trucks, aimed at permitting interchangeability of forks and certain attachments in relation to truck rated capacity and fork arm type. It applies to conventional hook-on fork systems as specified in the 1977 text and its subsequent revisions.

Key topics and requirements

• Definition of hook-on type fork arms and fork arm carriers and their functional interfaces.
• Critical mounting dimensions and geometric tolerances required for interchangeability.
• Classification of fork arms by type and truck-rated capacity for correct matching.
• Requirements for secure engagement and retention of hook-on forks on carriers.
• Notes on identification, marking and limits of applicability (e.g., rated capacities covered by the standard).

Typical use and users

Used by fork-lift truck manufacturers, fork-arm and attachment producers, equipment designers, maintenance engineers, quality and compliance teams, and procurement specialists who need to ensure mechanical compatibility and safe interchangeability of fork arms and carriers. Also referenced by national standards bodies and trade associations when adopting or translating ISO provisions.

Related standards

Subsequent and related documents in the same series include ISO 2328:1993 (Edition 2, withdrawn) and the later, currently published ISO 2328:2011 (Edition 4, published September 2011), which supersedes earlier editions and contains updated dimensional and scope details for fork arms and carriages. Other ISO/TC 110 deliverables on industrial trucks (for example standards covering safety, testing and attachments) are also relevant for complete specification and compliance.

Keywords

fork-lift truck, fork arm, fork carrier, hook-on fork, mounting dimensions, interchangeability, ISO 2328, Russian translation, industrial trucks, ICS 53.060.

FAQ

Q: What is this standard?

A: It is the Russian-language edition/translation of ISO 2328:1977, which specifies mounting dimensions for hook-on type fork arms and fork arm carriers used on fork-lift trucks.

Q: What does it cover?

A: It covers the mounting interface dimensions, tolerances and essential requirements required to ensure safe mechanical engagement and interchangeability of hook-on fork arms and carriers for specified truck capacities.

Q: Who typically uses it?

A: Manufacturers of fork-lift trucks and fork arms, design and maintenance engineers, compliance officers and procurement teams who need standardized dimensions to ensure interchangeability of forks and attachments.

Q: Is it current or superseded?

A: The 1977 edition is withdrawn. The ISO 2328 series was revised (notably in 1993 and later editions), and the latest published edition in the series is ISO 2328:2011 (published September 2011), which supersedes earlier versions. Users should consult the 2011 edition (or the latest ISO catalogue entry) for current requirements.

Q: Is it part of a series?

A: Yes — ISO 2328 is a series of editions addressing fork-lift truck fork arm/carriage mounting dimensions; it has been revised several times (1977 → 1993 → 2007 → 2011). Related ISO standards from ISO/TC 110 cover other aspects of industrial truck safety, testing and attachments.

Q: What are the key keywords?

A: Fork-lift truck, hook-on fork, fork arm, fork carrier, mounting dimensions, interchangeability, ISO 2328, industrial trucks, ICS 53.060.