ISO TR 17784-2003 PDF

Full title and description

ISO/TR 17784:2003 — Rubber and plastics hoses and hose assemblies — Guide for use by purchasers, assemblers, installers and operating personnel. This Technical Report provides practical information on the properties, selection, storage, installation, testing and safe operation of rubber and plastic hoses and hose assemblies (metal hoses are excluded).

Abstract

Provides general guidance on materials used in hoses, precautions for storage, care during installation and fitting of couplings, and safety measures for testing. Intended to assist system designers, purchasers, assemblers, installers and operating personnel by giving example-based guidance to improve the safe operation of hose assemblies. Cross‑references a number of product and testing standards.

General information

• Status: Published (Technical Report).
• Publication date: July 2003 (Edition 1).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 23.040.70 — Hoses and hose assemblies.
• Edition / version: Edition 1 (2003).
• Number of pages: 53 pages.

Core bibliographic and lifecycle details as recorded in the ISO catalogue.

Scope

Guidance and illustrative examples covering selection, application and safe operation of rubber and plastic hoses and hose assemblies in a wide range of practical circumstances. The report excludes metal hoses and is intended to complement product standards by giving users practical recommendations on handling, installation, testing and safety. It is informative rather than normative and uses examples to illustrate best practice.

Key topics and requirements

• Hose selection criteria: media compatibility, temperature range, working and peak pressures, service conditions and expected life.
• Materials and construction: properties of linings, covers and reinforcements and their effects on performance.
• Pressure fundamentals: distinctions between maximum working pressure, proof/test pressure and burst pressure and responsibilities of manufacturers/users.
• Electrical properties and static control: conductive vs non-conductive constructions, bonding and earthing practices.
• Couplings and fittings: matching couplings to hose construction and ensuring secure, safe end connections (including electrical continuity where required).
• Installation, handling and storage: routing to avoid kinks, support, lifting and protection during service and transport.
• Testing and safety: recommended safety measures for pressure testing and inspection of hose assemblies.
• Limitations and references: illustrative examples only; check manufacturers’ instructions and applicable product standards for prescriptive requirements.

Summary of principal practical topics covered in the report.

Typical use and users

Intended for system designers, procurement professionals, assemblers, installers and operating/maintenance personnel who specify, assemble, install or operate rubber and plastic hose assemblies. Used as an informative reference to improve safety and to complement product-specific standards and manufacturer instructions.

Related standards

The report cross‑references and complements a number of ISO product and test standards relevant to hoses and couplings, including (but not limited to) ISO 8444, ISO 8445, ISO 8446, ISO 8447, ISO 8448, ISO 8449, ISO 8450, ISO 10807, ISO 10806 and ISO 10380. Users should consult these product standards for prescriptive requirements.

Keywords

hoses; hose assemblies; rubber; plastics; couplings; installation; storage; testing; safety; selection; pressure; static control.

FAQ

Q: What is this standard?

A: A Technical Report (ISO/TR 17784:2003) giving practical guidance on rubber and plastics hoses and hose assemblies for purchasers, assemblers, installers and operating personnel.

Q: What does it cover?

A: Practical guidance on material properties, selection, storage, installation, coupling/termination practices, pressure testing and safety measures; it is informative and example-based rather than a prescriptive product specification.

Q: Who typically uses it?

A: System designers, purchasers, assemblers, installers, maintenance and operations staff, and anyone responsible for safe selection, installation and testing of rubber or plastic hose assemblies.

Q: Is it current or superseded?

A: The publication date is July 2003 (Edition 1). The ISO catalogue shows the Technical Report as published and records its lifecycle reviews; the document was confirmed on review (remains current as the confirmed 2003 edition). Users should check the ISO catalogue or their national standards body for any later amendments or replacements.

Q: Is it part of a series?

A: It sits within ISO technical work for hoses under ISO/TC 45/SC 1 and complements product and test standards in the same domain (see Related standards above) rather than being a numbered multi‑part series.

Q: What are the key keywords?

A: Hoses, hose assemblies, rubber, plastics, couplings, installation, storage, testing, safety, pressure, static/electrical continuity.