ASTM D7466/D7466M-23 PDF

SIGNIFICANCE AND USE 5.1 The asperity height is an index property used to quantify one of the physical attributes related to the surface roughness of textured geomembranes. 5.2 This test method is applicable to all currently available textured geomembranes that are deployed as manufactured geomembrane sheets. SCOPE 1.1 This test method covers a procedure to measure the asperity height of textured geomembranes. 1.2 This test method does not provide for measurement of the spacing between the asperities nor of the complete profile of the textured surface. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.