Reciprocating internal combustion engine driven alternating current generating sets - Measurement of airborne noise by the enveloping surface method
Reciprocating internal combustion engine driven alternating current generating sets - Measurement of airborne noise by the enveloping surface method
Мы хотим включить аналитику посещений, чтобы понимать, что искать людям на сайте. Без вашего согласия счётчики не загружаются. Политика конфиденциальности
1 Scope This part of ISO 8528 defines measurement methods for the determination of airborne noise emitted by reciprocating internal combustion engine driven generating sets in such a way that the total of relevant noise emissions, e.g. exhaust and cooling system noise, together with all other sources of engine noise, are evaluated on a similar basis to yield comparable results. However, when the exhaust and cooling systems are ducted to a remote site their noise contribution is not to be included in this part of ISO 8528. The essential noise emission characteristic value is the sound power level. The results of measurement taken in accordance with this part of ISO 8528 are classified as either accuracy grade 2 or grade 3 depending on which acoustic measurement conditions are complied with. Accuracy grade 2 (i.e., engineering method in accordance with ISO 3744) requires the measuring area to be a substantially acoustic-free field over a reflecting plane (with an environmental correction K 2A ≤ 2 dB) and with negligible background noise level (background noise correction K 1A ≤ 1,3 dB). Accuracy grade 3 (i.e. survey method in accordance with ISO 3746) requires the environmental correction K 2A to be less or equal than 7 dB, and the background noise correction K 1A to be less or equal than 3 dB. For the operation of a generating set under steady conditions this part of ISO 8528 allows for the calculation of the A-weighted sound power level as well as appropriate octave or one third octave sound power level for the appropriate accuracy grade. This part of ISO 8528 applies to RIC e...
Стандарты, упомянутые в описании