Explosive atmospheres - Gas detectors. Performance requirements of open path detectors for flammable gases
Explosive atmospheres - Gas detectors. Performance requirements of open path detectors for flammable gases
Мы хотим включить аналитику посещений, чтобы понимать, что искать людям на сайте. Без вашего согласия счётчики не загружаются. Политика конфиденциальности
1 Scope This part of EN 60079‑29 specifies performance requirements of equipment for the detection and measuring of flammable gases or vapours in ambient air by measuring the spectral absorption by the gases or vapours over extended optical paths , ranging typically from one metre to a few kilometres. Such equipment measures the integral concentration of the absorbing gas over the optical path in units such as LFL metre for flammable gases.
NOTE 1 Actual values of concentration can be deduced only where it can be established that the concentration is uniform over the optical path , for example in very short optical paths (<100 mm). In such cases, the equipment is within the scope of EN 60079‑29‑1.
NOTE 2 This standard is based upon present absorption techniques using infrared radiation. Other techniques and applications may require additional test considerations (e.g. pressure test).
Equipment falling within the scope of this standard is classified by the following types:
Type 1: an optical transmitter and receiver , located at either end of a path through the atmosphere to be monitored.
...
Другие стандарты BS