In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
Мы хотим включить аналитику посещений, чтобы понимать, что искать людям на сайте. Без вашего согласия счётчики не загружаются. Политика конфиденциальности
1 Scope This International Standard applies to in-cable control and protection devices (IC-CPDs) for mode 2 charging of electric road vehicles, hereafter referred to as IC-CPD including control and safety functions. This standard applies to portable devices performing simultaneously the functions of detection of the residual current , of comparison of the value of this current with the residual operating value and of opening of the protected circuit when the residual current exceeds this value. The IC-CPD according to this standard
• has a control pilot function controller in accordance with IEC TS 62763;
• checks supply conditions and prevents charging in case of supply faults under specified conditions;
• may have a switched protective conductor.
These IC-CPDs are intended for use in TN-, and TT-systems. The use of IC-CPDs in IT systems may be limited.
Residual currents with frequencies different from the rated frequency, d.c. residual currents and specific environmental situation are considered. This standard is applicable to IC-CPDs performing the safety and control functions as required in IEC 61851‑1 for mode 2 charging of el...
Упомянутые в описании и другие стандарты BS