Steels. Determination and verification of the depth of carburized and hardened cases
Steels. Determination and verification of the depth of carburized and hardened cases
Мы хотим включить аналитику посещений, чтобы понимать, что искать людям на сайте. Без вашего согласия счётчики не загружаются. Политика конфиденциальности
1 Scope This International Standard defines the case-hardened depth, and specifies methods for the determination of this depth, in steel. It is applicable to
a) carburized cases and carbonitrided cases;
b) parts that, when heat treated to final hardness, have a hardness of less than 450 HV 1 at a distance of three times the case-hardened depth, from the surface.
The case-hardened depth is defined by special agreement where these conditions are not met. For steels that, in the part under test, and at a distance of three times the case-hardened depth from the surface, present a hardness greater than 450 HV 1, the criterion can still be used, provided that a limiting hardness value greater than 550 HV 1 – in steps of 25 units – be selected for the case-hardened depth.
Другие стандарты BS