Metallic materials. Tensile testing in liquid helium
Metallic materials. Tensile testing in liquid helium
Мы хотим включить аналитику посещений, чтобы понимать, что искать людям на сайте. Без вашего согласия счётчики не загружаются. Политика конфиденциальности
1 Scope This International Standard specifies the method of tensile testing of metallic materials in liquid helium (boiling point at − 269 °C or 4,2 K, designated as 4 K) and defines the mechanical properties that can be determined. This International Standard may also apply to tensile testing at cryogenic temperatures (less than − 196 °C or 77 K), which requires special apparatus, smaller specimens, and concern for serrated yielding, adiabatic heating and strain rate effects. To conduct a tensile test at 4 K in accordance with this International Standard, the specimen installed in a cryostat is fully submerged in liquid helium (He) and tested using displacement control at a nominal strain rate of 10 − 3 s − 1 or less. Tests using force control or higher strain rates are not considered.
Другие стандарты BS