Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria - General guidelines
Mechanical vibration of non-reciprocating machines. Measurements on rotating shafts and evaluation criteria - General guidelines
Мы хотим включить аналитику посещений, чтобы понимать, что искать людям на сайте. Без вашего согласия счётчики не загружаются. Политика конфиденциальности
1 Scope This part of ISO 7919 sets out general guidelines for measuring and evaluating machinery vibration by means of measurements made directly on rotating shafts for the purpose of determining shaft vibration with regard to
a) changes in vibrational behaviour;
b) excessive kinetic load;
c) the monitoring of radial clearances.
It is applicable to measurements of both absolute and relative radial shaft vibration, but excludes torsional and axial shaft vibration. The procedures are applicable for both operational monitoring of machines and to acceptance testing on a test stand and after installation. Guidelines are also presented for setting operational limits.
NOTES
1 Evaluation criteria for different classes of machinery will be included in other parts of ISO 7919 when they become available. In the meantime, guidelines are given in annex A.
2 The term "shaft vibration" is used throughout ISO 7919 because, in most cases, measurements will be made on machine shafts; however, ISO 7919 is also applicable to measurements made on other rotating elements if such elem...
Упомянутые в описании и другие стандарты BS