UNE-EN 1263-1-2018 PDF

Full title and description

UNE-EN 1263-1:2018 — Temporary works equipment — Safety nets — Part 1: Safety requirements, test methods. This standard sets performance, construction and testing requirements for safety nets and their accessories used as collective fall‑protection on construction sites and other temporary works.

Abstract

Specifies essential safety requirements and laboratory test methods for safety nets (netting, border rope, attachment ropes and associated components). The standard defines classification by net class and system type, minimum strength and energy‑absorption/ fracture‑energy criteria, marking and labelling, and the use of test meshes to monitor in‑service ageing. Note: EN 1263‑1 covers product performance and testing; installation and in‑service placement is addressed in the companion document EN 1263‑2.

General information

• Status: Standard (active as the UNE adoption of the EN document).
• Publication date: 17 October 2018.
• Publisher: AENOR (UNE adoption of the CEN/EN standard).
• ICS / categories: 13.340.60 — Protection against falling and slipping.
• Edition / version: UNE‑EN 1263‑1:2018 (edition published 2018).
• Number of pages: Typically published as 45 pages (commercial listings vary; some catalogues show 45–50 pages).

Scope

Applies to safety nets and their accessory components manufactured for use as collective fall‑protection on construction sites, scaffolding, falsework, formwork and assembly work. It covers product requirements and laboratory test methods for netting, ropes and fittings. The standard does not specify installation procedures (see EN 1263‑2 for installation/use guidance).

Key topics and requirements

• Product classification by net class (e.g., classes based on mesh size and minimum fracture energy) and by system type (horizontal and vertical system designations such as S, T, U, V).
• Minimum mechanical performance: tensile strength, fracture/energy‑absorption criteria of meshes and ropes, and ageing considerations (test meshes and reduced strength allowances).
• Test methods for laboratory assessment of nets, ropes and connections, including specified test meshes to verify residual performance after ageing.
• Marking and labelling requirements — manufacturer identification, designation (standard number), net class/system, manufacture date, minimum certified energy absorption and test/certification reference.
• Requirements for accessory components (border rope, coupling/fastening ropes, shackles and other fittings) so the complete system meets performance criteria.
• Exclusions and interface: product standard only; installation, positioning and on‑site anchoring are covered in EN 1263‑2 and other site‑safety regulations.

Typical use and users

Used by construction contractors, scaffolding and formwork suppliers, safety‑net manufacturers, test laboratories, certification bodies, site safety managers and procurement teams specifying collective fall protection. Typical applications include edge protection below work areas, protection under formwork, tray nets at slab edges and vertical/balustrade nets on facades.

Related standards

Commonly referenced companion and related standards include EN 1263‑2 (installation and use of safety nets), EN 13374 (temporary edge protection systems), and other national adoptions and complementary technical rules (examples cited in national catalogues and standards databases). Many national catalogues and sellers list UNE 81652 and other related technical documents as interoperable references.

Keywords

safety nets; fall protection; temporary works; test methods; energy absorption; net classes; border rope; net systems (S, T, U, V); AENOR; EN 1263‑1.

FAQ

Q: What is this standard?

A: UNE‑EN 1263‑1:2018 is the Spanish adoption of the European product standard EN 1263‑1 that sets safety, construction and laboratory test requirements for safety nets used as collective fall‑protection.

Q: What does it cover?

A: It covers product performance (netting, ropes, fittings), classification by class and system, mechanical test methods, marking/label requirements and use of test meshes for ageing — but not the on‑site installation procedures (see EN 1263‑2).

Q: Who typically uses it?

A: Manufacturers of safety nets, test laboratories, certification bodies, construction contractors, scaffolding/formwork firms and site safety managers specifying or verifying collective protection systems.

Q: Is it current or superseded?

A: The UNE‑EN 1263‑1:2018 edition is the 2018 product edition adopted by UNE/AENOR. Users should check national catalogues or AENOR for any later confirmations, amendments or replacements.

Q: Is it part of a series?

A: Yes — it is Part 1 (product requirements and test methods). Part 2 (EN 1263‑2) addresses installation and use; both are normally used together for selecting, certifying and installing safety nets.

Q: What are the key keywords?

A: safety nets, fall protection, temporary works, test methods, net classification, border rope, energy absorption, EN 1263‑1.