ISO 10245-4-2004 cor1-2006 PDF

Full title and description

ISO 10245-4:2004 with Technical Corrigendum 1 (2006) — "Cranes — Limiting and indicating devices — Part 4: Jib cranes". This entry describes the 2004 international standard for limiting and indicating devices used on jib-type cranes together with Corrigendum 1 (published May 2006) which corrects or clarifies editorial/technical points in the 2004 text.

Abstract

Specifies requirements for devices that limit and/or indicate loads, motions, performance and environmental conditions of jib-type cranes (as defined in ISO 4306-1). The corrigendum (Cor 1:2006) provides a technical correction to the 2004 publication.

General information

• Status: Published (International Standard; Corrigendum published as Technical Corrigendum 1).
• Publication date: Main standard published 2004-11 (ISO 10245-4:2004); Corrigendum 1 published 2006-05.
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 53.020.20 (Cranes).
• Edition / version: Edition 1 (ISO 10245-4:2004) plus Technical Corrigendum 1 (2006).
• Number of pages: Main standard: 4 pages; Corrigendum: 1 page (combined contents typically delivered as the 2004 text plus a 1-page corrigendum).

Scope

Defines requirements for limiting and indicating devices used on jib-type cranes (excluding offshore, tower, mobile and railway cranes that are covered in other parts of the ISO 10245 series). Requirements relate to the devices that measure or limit load, motion and other performance/environmental parameters necessary for safe operation of jib cranes.

Key topics and requirements

• Requirements for load-limiting and load-indicating devices on jib cranes.
• Performance and accuracy criteria for indicators and limiters relevant to safe crane operation.
• Environmental and installation considerations for devices used on jib cranes.
• Interaction with relevant crane vocabulary and definitions (as referenced in ISO 4306-1) and with the general requirements of the ISO 10245 series (Part 1).
• Corrections/clarifications introduced by Corrigendum 1 (2006) to the original 2004 text.

Typical use and users

Used by crane manufacturers, control-system and safety-equipment designers, certifying bodies, inspection and maintenance engineers, and procurement/specification authors who need to ensure limiting and indicating devices for jib cranes meet internationally agreed performance and safety requirements.

Related standards

Related documents commonly referenced with ISO 10245-4 include ISO 10245-1 (general requirements for limiting and indicating devices), ISO 4306-1 (crane vocabulary — general), and design/principles documents such as parts of ISO 8686 (design principles for load and load combinations, including Part 4 for jib cranes). National adoptions and related national standards may exist (for example TCVN adoptions).

Keywords

jib cranes, limiting devices, indicating devices, load indicator, overload protection, crane safety, ISO 10245-4, corrigendum, crane instrumentation.

FAQ

Q: What is this standard?

A: ISO 10245-4:2004 is an international standard that specifies requirements for limiting and indicating devices on jib-type cranes; ISO 10245-4:2004/Cor 1:2006 is the Technical Corrigendum 1 that corrects or clarifies parts of the 2004 text.

Q: What does it cover?

A: It covers functional and performance requirements for devices that indicate or limit load, motion and related performance/environmental parameters on jib cranes (excluding certain crane types addressed in other parts of the series).

Q: Who typically uses it?

A: Crane manufacturers, equipment designers, testing and certification bodies, maintenance and safety engineers, and specifiers writing procurement or compliance documentation.

Q: Is it current or superseded?

A: The base standard ISO 10245-4 was published in November 2004 and Corrigendum 1 was published in May 2006. The ISO catalogue entry shows the 2004 edition and its corrigendum as published; users should check the ISO catalogue for any later revisions or replacements before relying on the text for new designs. As of the last ISO catalogue status summary, the 2004 edition has been subject to periodic review and the corrigendum remains the corrective publication from 2006.

Q: Is it part of a series?

A: Yes — it is part of the ISO 10245 series ("Limiting and indicating devices" for cranes). Part 1 provides general requirements and other parts cover different crane types; ISO 10245-4 addresses jib cranes specifically.

Q: What are the key keywords?

A: Jib crane, limiting device, indicating device, load indicator, overload, crane safety, ISO 10245-4, corrigendum 2006.