ISO 10550-1994 PDF

Full title and description

ISO 10550:1994 — Micrographics — Planetary camera systems — Test target for checking performance. This international standard specifies a test target and associated checks used to evaluate and monitor the imaging performance of planetary micrographics camera systems producing first‑generation microforms.

Abstract

Specifies methods for checking the performance of planetary camera systems and for monitoring cameras in routine use. Applies to systems used to produce first‑generation microforms that comply with ISO 3272‑1, ISO 3272‑2, ISO 6199 or ISO 9923. The standard does not apply to the production of duplicates or hard copy.

General information

• Status: Published (confirmed).
• Publication date: February 1994 (1994‑02).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 37.080 (Micrographics).
• Edition / version: Edition 1 (1994).
• Number of pages: 4.

Scope

Provides the design and use of a test target for checking key imaging characteristics of planetary microfilm cameras (for example, resolution, registration and contrast/grayscale) and gives procedures for routine verification and monitoring of camera performance. The scope is limited to production of first‑generation microforms and excludes duplicate generation or hard‑copy output processes.

Key topics and requirements

• Specification of a test target intended for planetary camera systems.
• Checks and measurement points for evaluating imaging performance (resolution, sharpness, registration, tonal range/contrast).
• Procedures for routine monitoring of camera performance in production environments.
• Applicability limited to first‑generation microforms that meet referenced micrographics standards.
• Reference to related ISO micrographics standards (ISO 3272‑1, ISO 3272‑2, ISO 6199, ISO 9923).

Typical use and users

Intended for archival and preservation departments, commercial micrographics service providers, libraries, museums, equipment manufacturers and quality/control laboratories that operate or certify planetary camera systems used to produce first‑generation microforms.

Related standards

Cross‑references and relevance to ISO 3272‑1 and ISO 3272‑2 (microform production), ISO 6199 and ISO 9923 (micrographics practices) and other ISO/TC 171 publications on micrographics and imaging quality.

Keywords

micrographics, planetary camera, test target, performance check, microfilm, image quality, resolution, registration, ISO 3272, ISO 6199, ISO 9923

FAQ

Q: What is this standard?

A: ISO 10550:1994 is an ISO international standard that defines a test target and procedures for checking the performance of planetary micrographics camera systems used to produce first‑generation microforms.

Q: What does it cover?

A: It covers the design and use of a test target and the routine checks needed to evaluate imaging characteristics such as resolution, registration and tonal range; it applies only to first‑generation microform production and not to duplicates or hard copy.

Q: Who typically uses it?

A: Archivists, librarians, commercial microfilm producers, equipment manufacturers, quality/control engineers and test laboratories involved in micrographics production and equipment maintenance.

Q: Is it current or superseded?

A: This edition (ISO 10550:1994, Edition 1) was published in February 1994 and has been subject to periodic review; the ISO record shows it was reviewed and confirmed, and the 1994 edition remains the current confirmed version.

Q: Is it part of a series?

A: It is part of the body of ISO micrographics standards produced under ISO/TC 171 and is intended to be used alongside related standards such as ISO 3272‑1, ISO 3272‑2, ISO 6199 and ISO 9923.

Q: What are the key keywords?

A: Micrographics; planetary camera; test target; image quality; microfilm; first‑generation microform; resolution; registration; contrast.