ISO 10400-1993 rus PDF

Full title and description

ISO 10400:1993 — Petroleum and natural gas industries — Formulae and calculation for casing, tubing, drill pipe and line pipe properties. This International Standard collects the formulae and calculation methods used to derive the mechanical and geometric properties of casing, tubing, drill pipe and line pipe, and adopts (with modifications for international use) the requirements from the referenced API bulletin.

Abstract

This standard provides formulae, calculation procedures and associated conventions for determining physical and mechanical properties of tubular products used in the petroleum and natural gas industries (casing, tubing, drill pipe and line pipe). It was prepared to harmonize the calculation methods and to adopt the provisions of the referenced API bulletin for international use. The original publication date is December 1993; the document has since been withdrawn and a technical report replaced or updated the content in 2007.

General information

• Status: Withdrawn (withdrawal recorded; content superseded by later ISO/TR guidance).
• Publication date: December 1993 (ISO lists publication date as 1993-12; some distributors record 23 December 1993).
• Publisher: International Organization for Standardization (ISO).
• ICS / categories: 75.180.10 (Petroleum and natural gas industries).
• Edition / version: Edition 1 (1993).
• Number of pages: ISO bibliographic entry lists 37 pages; some commercial distributors list alternate page counts (e.g., 46 pages in distributor records). Users should verify pagination with the supplier copy.

Scope

ISO 10400:1993 specifies the formulae and calculation methods used to determine dimensions, sectional properties, weights, and selected mechanical characteristics of tubular products used in oil and gas operations — specifically casing, tubing, drill pipe and line pipe. The standard adopts the calculation basis from the cited API bulletin (API Bulletin 5C3, 1989 edition) with modifications for international standardization. The scope is limited to formulae and calculation procedures (it does not itself set material specifications or detailed acceptance tests).

Key topics and requirements

• Standardized formulae for sectional properties (area, moment of inertia, section modulus) and weight calculations for tubular products.
• Methods to calculate mechanical properties derived from geometry (e.g., bending and torsional characteristics).
• Conventions for units, dimensional tolerances and round/nominal sizing used in calculations.
• Adoption and adaptation of API Bulletin 5C3 formulae for international usage.
• Guidance intended for engineering calculations rather than procurement specification text or manufacturing tolerances.

Typical use and users

Engineers and technical specialists in the oil & gas industry — drilling, completions, well construction, pipeline and tubular design — use the formulae for routine calculations, structural checks and to derive properties for finite-element modelling or design verification. Standards libraries, procurement and quality personnel may consult the standard when checking supplier data sheets or converting between nominal sizes and calculated properties.

Related standards

ISO 10400:1993 has been withdrawn and the content was reviewed and revised in a later ISO technical report (ISO/TR 10400:2007). Related documents include API Bulletins (notably API Bulletin 5C3 which provided the source formulae adopted by ISO 10400) and other ISO/TC 67 standards covering tubular goods and petroleum engineering practice. Users should consult ISO/TR 10400:2007 or current API and ISO TC 67 publications for the latest guidance.

Keywords

petroleum, natural gas, casing, tubing, drill pipe, line pipe, tubular, formulae, calculations, section properties, API 5C3, ISO/TR 10400.

FAQ

Q: What is this standard?

A: ISO 10400:1993 is an International Standard that collected the formulae and calculation methods for the properties of casing, tubing, drill pipe and line pipe used in the petroleum and natural gas industries.

Q: What does it cover?

A: It covers mathematical formulae and calculation procedures for geometric and derived mechanical properties (areas, moments of inertia, section moduli, weights, etc.) of tubular products. It adopts and adapts the formulae from the referenced API bulletin for international standardization.

Q: Who typically uses it?

A: Petroleum and natural gas engineers (drilling, completions, pipeline design), technical calculation teams, standards librarians and procurement/quality staff who need standardized calculation methods for tubular product properties.

Q: Is it current or superseded?

A: ISO 10400:1993 has been withdrawn. Its content was updated/reviewed in ISO/TR 10400:2007 (technical report). Users seeking current calculation guidance should consult the later ISO/TR and current API documents.

Q: Is it part of a series?

A: The document was developed under ISO/TC 67 (materials, equipment and offshore structures for petroleum and natural gas industries), subcommittee SC 5 (casing, tubing and drill pipe). The subject matter is related to other ISO and API publications dealing with tubular goods; it has a later ISO technical report successor (ISO/TR 10400:2007).

Q: What are the key keywords?

A: Casing, tubing, drill pipe, line pipe, tubular, formulae, calculation, section properties, API 5C3, petroleum industry.