Overview
EN ISO 10724-1:2001 (ISO 10724-1:1998) specifies general principles for the injection moulding of test specimens from thermosetting powder moulding compounds (PMCs). Part 1 focuses on establishing reproducible moulding conditions and describes mould designs for producing multipurpose test specimens. The standard promotes uniform reporting of processing parameters so that test specimens yield comparable mechanical, thermal and processing data across laboratories and suppliers.
Key topics and technical requirements
- Moulding parameters defined - clear definitions and measurement points for:
- mould temperature, melt temperature, melt pressure and hold pressure
- injection time, hold time, cure time, cycle time and mould-open time
- Mould design guidance - specification of standard ISO moulds (types A, D1 and D2) and multi-cavity arrangements to ensure equivalent flow-path geometries and specimen properties.
- Specimen geometry and critical areas - identification of the critical cross-sectional area where test measurements are taken; guidance to ensure reproducible shaping of tensile, flexural or multipurpose specimens.
- Process control and reporting - requirement to document the main moulding conditions so results can be compared between tests, materials and laboratories.
- Definitions and formulas - standardized definitions (e.g., melt pressure calculation from screw force) and relationships used to determine minimum locking force and other machine settings.
- Scope limitations - Part 1 covers multipurpose specimens and general principles; small plates and other specimen types are addressed in Part 2.
Applications and who uses it
EN ISO 10724-1 is intended for:
- Materials and R&D laboratories preparing standardized test specimens for property evaluation of thermosetting PMCs.
- Quality control teams in polymer and composite manufacturing, ensuring consistent sampling and testability.
- Injection moulding engineers specifying moulds and processing windows to minimize variability from cure, filler orientation or residual stress.
- Standards bodies and test houses harmonizing test methods and publishing material data sheets.
Practical uses include developing reproducible moulding procedures for phenolic, urea-formaldehyde, melamine and polyester PMCs; establishing processing windows for comparative testing; and ensuring consistent specimen preparation for certification and material selection.
Related standards
Keywords: EN ISO 10724-1:2001, ISO 10724-1, injection moulding, thermosetting powder moulding compounds, PMCs, multipurpose test specimens, moulding parameters, mould design.