EN ISO 1269:2006 PDF

Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) (ISO 1269:2006)

Название (английский):

EN ISO 1269:2006

Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) (ISO 1269:2006)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 15 ноября 2006 г.
Издание:: CEN EN 1269 edition 1 version 1
ICS:: 83.080.20

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

ISO 1269:2006 specifies two methods for determining the volatile matter (including water) in homopolymer and copolymer resins of vinyl chloride.

Технические детали

Технический комитет: CEN/TC 249 - Plastics
SKU: EN ISO 1269:2006

Abstract

Overview

EN ISO 1269:2006 - Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) - defines two validated laboratory methods to measure the volatile matter (including water) content in vinyl chloride resins (PVC homopolymers and copolymers). The standard is published by ISO and adopted by CEN (EN ISO 1269:2006) and is used for quality control, material specification and compliance testing of thermoplastic vinyl chloride resins.

Key topics and technical requirements

Scope: Two methods (Method A and Method B) for determining volatile matter, including water, in vinyl chloride resins.
Principle: Evaporate volatile components from a weighed test portion by heating to constant mass and calculate percentage loss.
Method A (oven and balance):
- Oven temperature: 110 °C ± 2 °C (105 °C ± 2 °C recommended if thermal degradation is a concern).
- Weighing dish: shallow, ~80 mm diameter (glass, aluminium or stainless steel) with lid.
- Balance sensitivity: 0.001 g; weighings reported to nearest 0.005 g.
- Procedure: preheat dish 1 h, spread ~5 g sample, heat ~1 h then in 30 min increments until successive weighings differ ≤ 0.005 g.
Method B (automatic thermobalance):
- Oven temperature: 110 °C ± 2 °C.
- Automatic thermobalance (IR or halogen oven integrated with precision balance).
- Dish: ~100 mm diameter aluminium.
- Sample mass: typically 5–15 g depending on resin.
- End-point: mass loss rate

Overview

Key topics and technical requirements

Scope: Two methods (Method A and Method B) for determining volatile matter, including water, in vinyl chloride resins.
Principle: Evaporate volatile components from a weighed test portion by heating to constant mass and calculate percentage loss.
Method A (oven and balance):
- Oven temperature: 110 °C ± 2 °C (105 °C ± 2 °C recommended if thermal degradation is a concern).
- Weighing dish: shallow, ~80 mm diameter (glass, aluminium or stainless steel) with lid.
- Balance sensitivity: 0.001 g; weighings reported to nearest 0.005 g.
- Procedure: preheat dish 1 h, spread ~5 g sample, heat ~1 h then in 30 min increments until successive weighings differ ≤ 0.005 g.
Method B (automatic thermobalance):
- Oven temperature: 110 °C ± 2 °C.
- Automatic thermobalance (IR or halogen oven integrated with precision balance).
- Dish: ~100 mm diameter aluminium.
- Sample mass: typically 5–15 g depending on resin.
- End-point: mass loss rate

EN ISO 1269:2006 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of volatile matter (including w…

Packaging - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:2026)

Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2026)

Information security, cybersecurity and privacy protection - Controls, requirements, and guidance for persona…

Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2026)

Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale…

Health informatics - Device interoperability - Part 10101: Point-of-care medical device communication - Nomen…

Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2026)