Overview
EN ISO 14184-2:2011 - “Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method)” is a CEN-adopted ISO method for quantifying formaldehyde released from textiles under accelerated storage. The standard defines a vapour absorption procedure where a weighed fabric specimen is suspended above water in a sealed jar, incubated, and the formaldehyde absorbed by the water is measured colorimetrically.
Key facts:
- Method type: vapour absorption (released formaldehyde)
- Intended measurement range: 20 mg/kg to 3 500 mg/kg (below 20 mg/kg = “not detectable”)
- Incubation: (49 ± 2) °C for 20 h
- Detection: colorimetric assay (acetylacetone / Nash reagent), absorbance read at 412 nm
Key topics and technical requirements
- Sample preparation: Do not pre-condition specimens; store sealed prior to testing. Typical specimen mass ~1 g and extraction uses 50 ml water.
- Test apparatus: gas-tight jars (~0.95–1.0 l), wire-mesh baskets or suspension loop, incubator, water bath, spectrophotometer capable at 412 nm.
- Reagents: analytical-grade water (ISO 3696 grade 3), acetylacetone (Nash) reagent, ~37% formaldehyde stock (standardized per Annex A).
- Calibration & quantification: prepare and standardize a formaldehyde stock solution, generate multiple calibration points and use a first-order regression (y = a + bx) to determine µg/ml in extracts; account for dilution factors.
- Alternative methods & accuracy: Annex B describes the chromotropic acid alternative; Annex C provides information on test accuracy.
- Safety: the standard warns that reagents and procedures can be hazardous; follow appropriate health and safety rules.
Practical applications and users
EN ISO 14184-2:2011 is used to assess formaldehyde release from fabrics for:
- Manufacturers and finishers performing in-house quality control and process validation
- Independent textile testing laboratories providing compliance testing
- Retailers and importers verifying product safety against regulatory or customer requirements
- Regulatory bodies and certification schemes requiring formaldehyde release data
- Product safety and R&D teams evaluating finishing processes that use formaldehyde-based agents
Practical benefits:
- Provides a reproducible, standardized way to measure released formaldehyde (important for consumer safety, labelling and regulatory compliance)
- Useful for comparing finishing treatments, verifying wash-off efficiency, and monitoring process changes
Related standards
- ISO 14184-1:2011 - determination of free and hydrolysed formaldehyde (water extraction method)
- ISO 139 - standard atmospheres for conditioning and testing (referenced)
- ISO 3696 - water quality for analytical use (referenced)
Keywords: EN ISO 14184-2:2011, formaldehyde testing, textiles, vapour absorption method, released formaldehyde, Nash reagent, acetylacetone, 412 nm spectrophotometry.