EN ISO 15234:2010 PDF

Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999)

Название (английский):

EN ISO 15234:2010

Paints and varnishes - Testing of formaldehyde-emitting coatings and melamine foams - Determination of the steady-state concentration of formaldehyde in a small test chamber (ISO 15234:1999)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 17
Дата публикации:: 10 ноября 2010 г.
Издание:: CEN EN 15234 edition 1 version 1
ICS:: 87.040

Тип поставки:

Full version255 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:255 €

Описание (английский):

This International Standard specifies a test method for determining the equilibrium concentration of formaldehydefrom formaldehyde-emitting coatings and melamine foams in a small test chamber.It describes the determination of the equilibrium concentration of formaldehyde that is established in air at 23 °C and50 % relative humidity. The test closely simulates practical conditions and can be performed on a laboratory scale.Good correlation is obtained with values obtained on samples of the same material in a 40 m3 test chamber. Themethod, which is simple to perform, is therefore suitable for the preliminary determination of limits that have to beadhered to.

Технические детали

Технический комитет: CEN/TC 139 - Paints and varnishes
SKU: EN ISO 15234:2010

Abstract

Overview

EN ISO 15234:2010 (ISO 15234:1999 adopted by CEN) specifies a laboratory test method for determining the equilibrium (steady‑state) concentration of formaldehyde emitted from formaldehyde‑emitting coatings and melamine foams. The method measures the concentration established at 23 °C and 50 % relative humidity in a small test chamber (typically a 20 L desiccator) and is intended to simulate practical conditions on a laboratory scale. Results show good correlation with measurements from larger (40 m3) test chambers, making this method suitable for preliminary limit setting and comparative testing.

Key topics and technical requirements

Test conditions: specimens conditioned at (23 ±1) °C and (50 ±3) % RH (typically 28 days unless otherwise agreed).
Small test chamber: example uses a 20 L desiccator with controlled air flow and specimen cage.
Air‑replacement rate (n) and relative specimen area (a): steady‑state ratio n/a (m·h‑1) is used to characterise emission conditions (example: n = 3 h‑1, V = 20 L → specimen area A = 600 cm2 produces n/a ≈ 1).
Equilibrium definition: equilibrium concentration reached when several successive 1‑hour measurements differ by less than 0.02 mg/m3.
Sampling and analysis:
- Air passed through wash‑bottles (water trap) to absorb formaldehyde.
- Preferred analytical method: acetylacetone (Hantzsch) reaction with photometric detection at 412 nm. Other validated methods (e.g., fluorimetric) may be used if equivalent.
Apparatus: regulated air‑conditioned room, gas‑metering pumps, flowmeter/integrating flowmeter, silica gel drying tower, wash‑bottles, spectrophotometer, appropriate volumetric glassware and reagents.
Reproducibility: perform at least three determinations on fresh specimens of the same material.
Specimen preparation: detailed in annexes (A for paint coatings, B for melamine foams); other materials by agreement (annex C).

Applications

Preliminary screening of paints, varnishes and melamine foam formulations for formaldehyde emissions.
Comparative laboratory testing during product development and quality control.
Supporting evidence for indoor air quality assessments and conformity checks with national/regulatory emission limits.
Use by test laboratories to establish baseline emission behaviour before large‑scale chamber testing.

Who uses this standard

Coatings and foam manufacturers and R&D teams
Independent laboratory testing and certification bodies
Regulatory authorities and indoor air quality consultants
Product compliance and quality assurance teams

Related standards

ISO 3270 - Temperatures and humidities for conditioning and testing (referenced).
ISO 3696 - Water for analytical laboratory use (referenced).
EN ISO 15234:2010 - European adoption of ISO 15234:1999 (CEN).

Overview

Key topics and technical requirements

Test conditions: specimens conditioned at (23 ±1) °C and (50 ±3) % RH (typically 28 days unless otherwise agreed).
Small test chamber: example uses a 20 L desiccator with controlled air flow and specimen cage.
Air‑replacement rate (n) and relative specimen area (a): steady‑state ratio n/a (m·h‑1) is used to characterise emission conditions (example: n = 3 h‑1, V = 20 L → specimen area A = 600 cm2 produces n/a ≈ 1).
Equilibrium definition: equilibrium concentration reached when several successive 1‑hour measurements differ by less than 0.02 mg/m3.
Sampling and analysis:
- Air passed through wash‑bottles (water trap) to absorb formaldehyde.
- Preferred analytical method: acetylacetone (Hantzsch) reaction with photometric detection at 412 nm. Other validated methods (e.g., fluorimetric) may be used if equivalent.
Apparatus: regulated air‑conditioned room, gas‑metering pumps, flowmeter/integrating flowmeter, silica gel drying tower, wash‑bottles, spectrophotometer, appropriate volumetric glassware and reagents.
Reproducibility: perform at least three determinations on fresh specimens of the same material.
Specimen preparation: detailed in annexes (A for paint coatings, B for melamine foams); other materials by agreement (annex C).

Applications

Preliminary screening of paints, varnishes and melamine foam formulations for formaldehyde emissions.
Comparative laboratory testing during product development and quality control.
Supporting evidence for indoor air quality assessments and conformity checks with national/regulatory emission limits.
Use by test laboratories to establish baseline emission behaviour before large‑scale chamber testing.

Who uses this standard

Coatings and foam manufacturers and R&D teams
Independent laboratory testing and certification bodies
Regulatory authorities and indoor air quality consultants
Product compliance and quality assurance teams

Related standards

ISO 3270 - Temperatures and humidities for conditioning and testing (referenced).
ISO 3696 - Water for analytical laboratory use (referenced).
EN ISO 15234:2010 - European adoption of ISO 15234:1999 (CEN).

EN ISO 15234:2010 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Applications

Who uses this standard

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Applications

Who uses this standard

Related standards

Похожие стандарты

Paints and varnishes — Testing of formaldehyde-emitting coatings and melamine foams — Determination of the st…

Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing (ISO…

Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)