IEC 60095-4:2021 PDF

Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles

Название (английский):

IEC 60095-4:2021

Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 17
Дата публикации:: 15 июля 2021 г.
Издание:: IEC IS 60095 edition 3 version 1
ICS:: 29.220.20

Тип поставки:

Full version255 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:255 €

Описание (английский):

IEC 60095-4:2021 is applicable to lead-acid batteries used for starting, lighting and ignition of heavy trucks, commercial vehicles, busses and agricultural trucks. The object of this document is to specify global requirements of the main dimensions of starter batteries for Europe, North America and East Asia. This document comprises 12 types of "preferred types" of batteries. This document specifies dimensions of 4 types of batteries each for Europe (types A, B, C and D2), North America (types 4D, 8D, 31T, 31A) and East Asia (types E41, F51, G51, H52).

Технические детали

Технический комитет: TC 21 - Secondary cells and batteries
SKU: IEC 60095-4:2021

Abstract

Overview

IEC 60095-4:2021 (Edition 3.0) is the international standard that specifies the main dimensions and associated labelling/marking rules for lead‑acid starter batteries used for starting, lighting and ignition in heavy vehicles (heavy trucks, commercial vehicles, buses and agricultural trucks). The document defines a set of 12 “preferred types” of starter batteries - four for Europe (A, B, C, D2), four for North America (4D, 8D, 31T, 31A) and four for East Asia (E41, F51, G51, H52) - and provides global dimensional requirements to aid interchangeability and manufacturing consistency.

Key topics and technical requirements

Scope and types: Dimensional requirements for 12 preferred heavy‑vehicle battery types covering Europe, North America and East Asia.
Terminal dimensions and polarity marking: Positive terminal marking is mandatory (symbol “+” on the terminal or lid); negative marking (“–” or “NEG”) is optional. Symbols follow IEC 60417 graphical standards. Terminal geometry and taper dimensions are illustrated in the standard (see Figure 3).
Labelling and marking: Batteries must be marked in accordance with IEC 60095‑1. Polarity symbols may be indented or embossed to 0.4 mm ± 0.1 mm. Character heights and placement rules are specified.
Plastic material identification: Injection‑moulded components shall be marked per ISO 11469 and ISO 1043‑1 (e.g., >PP< or >PP/PE

Overview

Key topics and technical requirements

Scope and types: Dimensional requirements for 12 preferred heavy‑vehicle battery types covering Europe, North America and East Asia.
Terminal dimensions and polarity marking: Positive terminal marking is mandatory (symbol “+” on the terminal or lid); negative marking (“–” or “NEG”) is optional. Symbols follow IEC 60417 graphical standards. Terminal geometry and taper dimensions are illustrated in the standard (see Figure 3).
Labelling and marking: Batteries must be marked in accordance with IEC 60095‑1. Polarity symbols may be indented or embossed to 0.4 mm ± 0.1 mm. Character heights and placement rules are specified.
Plastic material identification: Injection‑moulded components shall be marked per ISO 11469 and ISO 1043‑1 (e.g., >PP< or >PP/PE

IEC 60095-4:2021 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Amendment 2 - Graphical symbols for use on equipment - Part 2: Symbol originals

Lead-acid starter batteries - Part 1: General requirements and methods of test

Plastics - Generic identification and marking of plastics products (ISO 11469:2016)

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics — Amendme…