Overview

IEC 60247:2004 is an international standard published by the International Electrotechnical Commission (IEC) that defines the procedures for measuring key electrical properties of insulating liquids. These properties include relative permittivity, dielectric dissipation factor (tan δ), and direct current (d.c.) resistivity. The standard primarily targets unused insulating liquids but is also applicable to liquids in service within electrical equipment such as transformers and cables.

This standard specifies detailed methodologies for accurate and consistent testing, ensuring reliable assessment of insulating liquids’ performance. The document addresses single phase liquid samples and provides optimized procedures for reference testing and routine measurements, including cleaning and preparation protocols.

Key Topics

Measurement Parameters
- Relative permittivity: Determines the ability of an insulating liquid to store electrical energy.
- Dielectric dissipation factor (tan δ): Assesses the dielectric losses in the insulating liquid under an AC electric field.
- d.c. resistivity: Measures the liquid’s resistance to direct current flow, indicating its purity and insulating quality.
Testing Scope and Conditions
- Applicable for new and in-service insulating liquids.
- Restricted to single phase insulating liquids.
- Standardized test temperature to ensure comparability.
- Reference and routine measurements distinguished with simplified procedures detailed in annexes.
Apparatus & Techniques
- Use of specialized test cells (e.g., three-terminal or two-terminal cells) designed for liquid dielectric measurements.
- Detailed cleaning procedures for test cells, including trisodium phosphate cleaning and ultrasonic cleaning variants, ensuring contamination-free environments.
- Defined test voltages, timing, and measurement sequences to reduce errors.
Sample Handling
- Proper sampling and preparation steps to maintain sample integrity.
- Conditioning and filling of test cells under controlled environments.
- Storage guidance for test cells to maintain accuracy between tests.
Report and Documentation
- Clear reporting requirements for test results including permittivity, tan δ, and resistivity values.
- Recommendations for documenting environmental and test conditions.

Applications

IEC 60247:2004 is essential for:

Electrical Utilities and Manufacturers Ensuring the quality and compliance of transformer oils, cable fluids, and other insulating liquids used in power generation and distribution equipment.
Quality Control and Maintenance Routine testing of in-service fluids to predict equipment performance, detect contamination or degradation and decide on maintenance or replacement actions.
Research and Development Testing new insulating liquids or formulations to benchmark dielectric properties before deployment in high voltage applications.
Certification and Compliance Meeting international regulatory requirements for electrical apparatus safety and performance.

Related Standards

IEC 60422 - Provides guidance on the maintenance of mineral insulating oils in electrical equipment, complementary to the testing procedures of IEC 60247.
IEC 60156 - Specifies methods for measuring dielectric dissipation factor and relative permittivity for insulating liquids using different test cells.
IEC 60296 - Covers the specification for unused mineral insulating oils for transformers and switchgear, often tested according to IEC 60247 protocols.
National standards and IEEE guidelines for insulating liquid testing and electrical equipment maintenance may also reference IEC 60247 methods.

By adhering to IEC 60247:2004, industries ensure high consistency, reliability, and safety in the use and evaluation of insulating liquids critical to electrical apparatus. The standard supports effective asset management and extends the operational longevity of electrical infrastructure through precise material characterization.

Overview

Key Topics

Measurement Parameters
- Relative permittivity: Determines the ability of an insulating liquid to store electrical energy.
- Dielectric dissipation factor (tan δ): Assesses the dielectric losses in the insulating liquid under an AC electric field.
- d.c. resistivity: Measures the liquid’s resistance to direct current flow, indicating its purity and insulating quality.
Testing Scope and Conditions
- Applicable for new and in-service insulating liquids.
- Restricted to single phase insulating liquids.
- Standardized test temperature to ensure comparability.
- Reference and routine measurements distinguished with simplified procedures detailed in annexes.
Apparatus & Techniques
- Use of specialized test cells (e.g., three-terminal or two-terminal cells) designed for liquid dielectric measurements.
- Detailed cleaning procedures for test cells, including trisodium phosphate cleaning and ultrasonic cleaning variants, ensuring contamination-free environments.
- Defined test voltages, timing, and measurement sequences to reduce errors.
Sample Handling
- Proper sampling and preparation steps to maintain sample integrity.
- Conditioning and filling of test cells under controlled environments.
- Storage guidance for test cells to maintain accuracy between tests.
Report and Documentation
- Clear reporting requirements for test results including permittivity, tan δ, and resistivity values.
- Recommendations for documenting environmental and test conditions.

Applications

IEC 60247:2004 is essential for:

Electrical Utilities and Manufacturers Ensuring the quality and compliance of transformer oils, cable fluids, and other insulating liquids used in power generation and distribution equipment.
Quality Control and Maintenance Routine testing of in-service fluids to predict equipment performance, detect contamination or degradation and decide on maintenance or replacement actions.
Research and Development Testing new insulating liquids or formulations to benchmark dielectric properties before deployment in high voltage applications.
Certification and Compliance Meeting international regulatory requirements for electrical apparatus safety and performance.

Related Standards

IEC 60422 - Provides guidance on the maintenance of mineral insulating oils in electrical equipment, complementary to the testing procedures of IEC 60247.
IEC 60156 - Specifies methods for measuring dielectric dissipation factor and relative permittivity for insulating liquids using different test cells.
IEC 60296 - Covers the specification for unused mineral insulating oils for transformers and switchgear, often tested according to IEC 60247 protocols.
National standards and IEEE guidelines for insulating liquid testing and electrical equipment maintenance may also reference IEC 60247 methods.

IEC 60247:2004 PDF

Технические детали

Abstract

Overview

Key Topics

Applications

Related Standards

Похожие стандарты

Abstract

Overview

Key Topics

Applications

Related Standards

Похожие стандарты

Corrigendum 1 - Mineral insulating oils in electrical equipment - Supervision and maintenance guidance

Insulating liquids - Determination of the breakdown voltage at power frequency - Test method

Fluids for electrotechnical applications. Mineral insulating oils for electrical equipment