Overview

IEC 60721-3-7:2026 establishes a classification system for environmental conditions and their severities relevant to products intended for portable and non-stationary use. Developed by the International Electrotechnical Commission (IEC), this standard assists manufacturers, designers, and product specifiers in anticipating the environmental stresses encountered when products are moved or used temporarily in varying locations, including during transfer, down time, maintenance, and repair.

This third edition, published in 2026, is a technical revision, replacing earlier versions from 1995 and their amendments. It features updated and newly established environmental classes, reflects the latest technical knowledge from relevant technical reports, and integrates or removes earlier annex content for enhanced clarity and usability.

Key Topics

Classification of Environmental Parameters
- Climatic (temperature, humidity, air pressure)
- Special climatic (e.g., heat radiation, movement of air, water exposure)
- Biological (mould, rodents, termites)
- Chemically active substances (contaminants, salt mist, industrial emissions)
- Mechanically active substances (dust, sand)
- Mechanical conditions (vibration, shock, free fall)
Portable and Non-Stationary Use
- Addresses products not permanently installed and frequently moved between locations.
- Considers environments such as offices, workshops, storage rooms, building sites, and outdoor settings (both weatherprotected and non-weatherprotected).
Environmental Severities
- Defines varying degrees of environmental impacts to allow informed selection of design and test criteria based on expected usage.
Combined Stresses
- Recognizes simultaneous exposure to multiple environmental factors, which may amplify stress on products.
Lifecycle Conditions
- Emphasizes that exposure can occur while stationary, during transfer, or in temporary locations, and that both short-term and cumulative long-term effects are relevant.

Applications

IEC 60721-3-7:2026 is broadly applicable for organizations and professionals involved in the design, manufacturing, specification, and testing of electrical and electronic products intended for portable and non-stationary applications. Key practical uses include:

Product Design and Specification
- Defining durability requirements to withstand portable use, encompassing harsh conditions encountered during moves or field deployment.
- Selecting appropriate environmental classes for product documentation and engineering specifications.
Quality Assurance and Compliance
- Informing environmental testing regimes for certifying products against expected real-world conditions.
- Guiding risk assessments for field service and maintenance activities.
Use Case Scenarios
- Equipment used in building maintenance, mobile communications, medical devices in field operations, portable instrumentation, and IT equipment in temporary installations.
Operational Planning
- Determining proper protection levels for products expected to experience frequent transfer or use in diverse environments, aiding in developing packaging, handling, and transport guidelines.

Related Standards

IEC 60721-3-7:2026 is part of the wider IEC 60721 series on environmental classifications. Related standards for environmental testing and classification include:

IEC 60721-1: General definitions and explanation of environmental parameters and severities.
IEC 60721-2-1/2-2/2-3/2-4/2-5: Define natural environmental conditions, such as temperature, humidity, precipitation, wind, air pressure, solar radiation, dust, and salt mist.
IEC 60721-3-0: Introduction to environmental parameter classification for groups and their severities.
IEC TR 62130, IEC TR 62131-3/4/5/8: Provide field data, transportation, storage, and handling conditions.
ISO 9223: Corrosion of metals and alloys, for additional information on chemically active environments.

IEC 60721-3-7:2026 supports the development of robust, reliable products by ensuring environmental conditions for portable and non-stationary use are rigorously and systematically classified, providing value across a variety of industries and applications.

Overview

Key Topics

Classification of Environmental Parameters
- Climatic (temperature, humidity, air pressure)
- Special climatic (e.g., heat radiation, movement of air, water exposure)
- Biological (mould, rodents, termites)
- Chemically active substances (contaminants, salt mist, industrial emissions)
- Mechanically active substances (dust, sand)
- Mechanical conditions (vibration, shock, free fall)
Portable and Non-Stationary Use
- Addresses products not permanently installed and frequently moved between locations.
- Considers environments such as offices, workshops, storage rooms, building sites, and outdoor settings (both weatherprotected and non-weatherprotected).
Environmental Severities
- Defines varying degrees of environmental impacts to allow informed selection of design and test criteria based on expected usage.
Combined Stresses
- Recognizes simultaneous exposure to multiple environmental factors, which may amplify stress on products.
Lifecycle Conditions
- Emphasizes that exposure can occur while stationary, during transfer, or in temporary locations, and that both short-term and cumulative long-term effects are relevant.

Applications

Product Design and Specification
- Defining durability requirements to withstand portable use, encompassing harsh conditions encountered during moves or field deployment.
- Selecting appropriate environmental classes for product documentation and engineering specifications.
Quality Assurance and Compliance
- Informing environmental testing regimes for certifying products against expected real-world conditions.
- Guiding risk assessments for field service and maintenance activities.
Use Case Scenarios
- Equipment used in building maintenance, mobile communications, medical devices in field operations, portable instrumentation, and IT equipment in temporary installations.
Operational Planning
- Determining proper protection levels for products expected to experience frequent transfer or use in diverse environments, aiding in developing packaging, handling, and transport guidelines.

Related Standards

IEC 60721-3-7:2026 is part of the wider IEC 60721 series on environmental classifications. Related standards for environmental testing and classification include:

IEC 60721-1: General definitions and explanation of environmental parameters and severities.
IEC 60721-2-1/2-2/2-3/2-4/2-5: Define natural environmental conditions, such as temperature, humidity, precipitation, wind, air pressure, solar radiation, dust, and salt mist.
IEC 60721-3-0: Introduction to environmental parameter classification for groups and their severities.
IEC TR 62130, IEC TR 62131-3/4/5/8: Provide field data, transportation, storage, and handling conditions.
ISO 9223: Corrosion of metals and alloys, for additional information on chemically active environments.

IEC 60721-3-7:2026 PDF

Технические детали

Abstract

Overview

Key Topics

Applications

Related Standards

Похожие стандарты

Abstract

Overview

Key Topics

Applications

Related Standards

Похожие стандарты

Amendment 1 - Classification of environmental conditions - Part 3: Classification of groups of environmental…

Classification of environmental conditions - Classification of groups of environmental parameters and their s…

Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation (I…