IEC 61169-47:2015 PDF

Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)

Название (английский):

IEC 61169-47:2015

Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 21
Дата публикации:: 30 марта 2015 г.
Издание:: IEC IS 61169 edition 2 version 1
ICS:: 33.120.30

Тип поставки:

Full version315 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:315 €

Описание (английский):

IEC 61169-47:2015, which is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick). It describes the interface dimensions with gauging information, electrical and mechanical performance including the mandatory tests selected from IEC 61169-1:2013, applicable to all DS relating to type F-Quick connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. This second edition cancels and replaces the first edition published in 2012. It constitutes a technical revision. The main changes are listed below: - Subclause 3.2 has been updated to better define gauging. - Table 2 has been updated for insertion and removal forces. - Clause 4 has been updated to refer to the new edition of IEC 61169-1.

Технические детали

Технический комитет: SC 46F - RF and microwave passive components
SKU: IEC 61169-47:2015

Abstract

Overview

IEC 61169-47:2015 is a sectional specification for radio-frequency (RF) coaxial connectors with clamp (push‑on) coupling, typically the F‑Quick variant used in 75 Ω cable networks. This second edition (2015) replaces the 2012 edition and provides rules for preparing detail specifications (DS) for type F‑Quick connectors - covering interface dimensions, gauging, electrical and mechanical performance, mandatory tests (as selected from IEC 61169‑1), test schedules and inspection requirements.

Key topics and technical requirements

Interface dimensions and examples: common and specific dimensional data for F‑Quick male plugs, including variants with resilient outer conductor sleeves, slotted outer conductors and snap rings.
- Example key dimensions (Table 1): inner conductor length A = 6.35–8.63 mm, inner conductor diameter D = 0.64–1.13 mm, reference plane opening F = 6.84 mm, reference plane outer diameter G = 7.11 mm, maximum envelope C ≈ 16.61 mm.
Mechanical gauging: defined gauges and tolerances to ensure interchangeability and correct fit with port threads and bulkhead dimensions.
Insertion and withdrawal forces: specific requirements for outer conductor gauge use - insertion force ≤ 35 N, withdrawal force ≥ 15 N (see Table 2 / Figure 5).
Electrical and mechanical performance: recommended characteristics and mandatory performance selection drawn from IEC 61169‑1 (general measuring methods and tests).
Quality assessment & test schedules: acceptance and periodic tests, environmental characteristics (including outdoor socket considerations), inspection and quality conformance procedures.
Preparation of detail specifications (DS): guidance and a blank DS pro‑forma to help manufacturers and standards authors produce consistent product specifications.

Practical applications and users

Typical use: indoor F‑type coaxial receiver leads, patch cables and push‑on connections in cable TV, satellite and broadband distribution.
Who uses this standard:
- Connector and cable design engineers and manufacturers
- Test laboratories and quality assurance teams performing conformance testing
- Procurement, compliance and certification bodies specifying DS for supply contracts
- System integrators and installers wanting interoperability and reliable mechanical/electrical performance
Practical benefits: ensures interchangeability, repeatable mechanical fit and predictable electrical behavior across suppliers; reduces field failures and simplifies test/inspection plans.

Related standards

IEC 61169‑1:2013 - Generic specification; general requirements and measuring methods (mandatory test selection).
IEC 61169‑24:2009 - Sectional specification for screw‑coupled F connectors (recommended where fixed/screwed coupling is preferred).
IEC 62037 (and IEC 62037‑3) - Passive RF and microwave devices, intermodulation measurement methods.

IEC 61169‑47 is essential for anyone specifying, designing or testing F‑Quick RF coaxial connectors in 75 Ω cable networks to ensure mechanical compatibility and defined performance.

Overview

Key topics and technical requirements

Interface dimensions and examples: common and specific dimensional data for F‑Quick male plugs, including variants with resilient outer conductor sleeves, slotted outer conductors and snap rings.
- Example key dimensions (Table 1): inner conductor length A = 6.35–8.63 mm, inner conductor diameter D = 0.64–1.13 mm, reference plane opening F = 6.84 mm, reference plane outer diameter G = 7.11 mm, maximum envelope C ≈ 16.61 mm.
Mechanical gauging: defined gauges and tolerances to ensure interchangeability and correct fit with port threads and bulkhead dimensions.
Insertion and withdrawal forces: specific requirements for outer conductor gauge use - insertion force ≤ 35 N, withdrawal force ≥ 15 N (see Table 2 / Figure 5).
Electrical and mechanical performance: recommended characteristics and mandatory performance selection drawn from IEC 61169‑1 (general measuring methods and tests).
Quality assessment & test schedules: acceptance and periodic tests, environmental characteristics (including outdoor socket considerations), inspection and quality conformance procedures.
Preparation of detail specifications (DS): guidance and a blank DS pro‑forma to help manufacturers and standards authors produce consistent product specifications.

Practical applications and users

Typical use: indoor F‑type coaxial receiver leads, patch cables and push‑on connections in cable TV, satellite and broadband distribution.
Who uses this standard:
- Connector and cable design engineers and manufacturers
- Test laboratories and quality assurance teams performing conformance testing
- Procurement, compliance and certification bodies specifying DS for supply contracts
- System integrators and installers wanting interoperability and reliable mechanical/electrical performance
Practical benefits: ensures interchangeability, repeatable mechanical fit and predictable electrical behavior across suppliers; reduces field failures and simplifies test/inspection plans.

Related standards

IEC 61169‑1:2013 - Generic specification; general requirements and measuring methods (mandatory test selection).
IEC 61169‑24:2009 - Sectional specification for screw‑coupled F connectors (recommended where fixed/screwed coupling is preferred).
IEC 62037 (and IEC 62037‑3) - Passive RF and microwave devices, intermodulation measurement methods.

IEC 61169‑47 is essential for anyone specifying, designing or testing F‑Quick RF coaxial connectors in 75 Ω cable networks to ensure mechanical compatibility and defined performance.

IEC 61169-47:2015 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Похожие стандарты

Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw…

Corrigendum 1 - Radio frequency connectors - Part 1: Generic specification - General requirements and measuri…

Passive RF and microwave devices, intermodulation level measurement - Measurement of passive intermodulation…

Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermod…