IEC 61753-052-3:2016 PDF

Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre non-connectorized fixed attenuator - Category U in uncontrolled environment

Название (английский):

IEC 61753-052-3:2016

Fibre optic interconnecting devices and passive components - Performance standard - Part 052-3: Single-mode fibre non-connectorized fixed attenuator - Category U in uncontrolled environment

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 28 июля 2016 г.
Издание:: IEC IS 61753 edition 2 version 1
ICS:: 33.180.20

Тип поставки:

Full version195 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:195 €

Описание (английский):

IEC 61753-052-3:2016 contains the minimum initial test and measurement requirements and severities which a fibre optic attenuator satisfies in order to be categorised as meeting the requirements of single-mode fibre non-connectorized fixed attenuator devices used in uncontrolled environments. IEC 60869-1 contains the generic specification of the optical attenuator. Optical performances specified in this document relate only to non-connectorized configurations optical attenuators. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical change with respect to the previous edition: reconsideration of performance requirements. Keywords: non-connectorized fixed attenuator devices, Category U in uncontrolled environments

Технические детали

Технический комитет: SC 86B - Fibre optic interconnecting devices and passive components
SKU: IEC 61753-052-3:2016

Abstract

Overview

IEC 61753-052-3:2016 is an IEC performance standard that defines the minimum initial test and measurement requirements for single‑mode fibre non‑connectorized fixed attenuator devices intended for Category U (uncontrolled) environments. This second edition (2016) revises performance requirements from the 2001 edition and applies specifically to non‑connectorized attenuator configurations - i.e., attenuators permanently terminated to fibre rather than connectorized patchcords.

Key topics and technical requirements

The standard specifies test methods, severities and acceptance criteria based on IEC’s basic test and measurement series (IEC 61300). Key technical requirements include:

Attenuation
- Operating wavelength ranges: 1260–1360 nm and 1460–1625 nm (measurements use tunable narrowband, non‑polarized sources).
- Tolerance for nominal insertion loss ≤ 5 dB: ±0.5 dB; for > 5 dB: ±10%.
- Total measurement uncertainty target: ≤ ±0.1 dB.
Return loss
- Measurement method OCWR (IEC 61300‑3‑7) with required ≥ 50 dB (Grade U) at 1310 nm, 1550 nm and/or 1625 nm. Measurements are performed twice (reversed sample).
Polarization dependent loss (PDL)
- Limit: ≤ 0.3 dB at 1550 nm (measure per IEC 61300‑3‑2).
High optical power
- Endurance test at 60 °C with defined power increments and monitoring of insertion loss and return loss (IEC 61300‑2‑14 / IEC 61300‑3‑3).
Mechanical and environmental tests
- Vibration (sinusoidal), cold exposure (‑25 °C for 96 h), plus tests for torsion, shock, damp heat, dust, salt mist and strain relief as referenced to IEC 61300 parts.
Sample preparation
- Samples shall be terminated onto single‑mode fibres per IEC 60793‑2‑50 types B1.1, B1.3 or B6 and cable formats per IEC 60794‑2‑50.

Applications and users

IEC 61753-052-3 is relevant to:

Manufacturers of fixed fibre attenuators for product design, validation and quality control.
Test laboratories performing type and batch verification for uncontrolled (field) installations.
System integrators, network operators and procurement teams who need to specify attenuator performance and acceptance criteria for passive optical links deployed in uncontrolled environments (outdoor enclosures, field panels, splice assemblies).

Typical applications include fixed attenuation in single‑mode fibre links where devices are permanently terminated to fibre and exposed to uncontrolled environmental conditions.

Related standards

IEC 60869‑1 - Generic specification for optical attenuators
IEC 61300 series - Basic test and measurement procedures (vibration, PDL, return loss, transient loss, etc.)
IEC 60793‑2‑50, IEC 60794‑2‑50 - Fibre and cable product/termination specifications

Keywords: non‑connectorized fixed attenuator devices, Category U in uncontrolled environments, IEC 61753‑052‑3, single‑mode fibre attenuator, attenuation tolerance, return loss, PDL.

Overview

Key topics and technical requirements

The standard specifies test methods, severities and acceptance criteria based on IEC’s basic test and measurement series (IEC 61300). Key technical requirements include:

Attenuation
- Operating wavelength ranges: 1260–1360 nm and 1460–1625 nm (measurements use tunable narrowband, non‑polarized sources).
- Tolerance for nominal insertion loss ≤ 5 dB: ±0.5 dB; for > 5 dB: ±10%.
- Total measurement uncertainty target: ≤ ±0.1 dB.
Return loss
- Measurement method OCWR (IEC 61300‑3‑7) with required ≥ 50 dB (Grade U) at 1310 nm, 1550 nm and/or 1625 nm. Measurements are performed twice (reversed sample).
Polarization dependent loss (PDL)
- Limit: ≤ 0.3 dB at 1550 nm (measure per IEC 61300‑3‑2).
High optical power
- Endurance test at 60 °C with defined power increments and monitoring of insertion loss and return loss (IEC 61300‑2‑14 / IEC 61300‑3‑3).
Mechanical and environmental tests
- Vibration (sinusoidal), cold exposure (‑25 °C for 96 h), plus tests for torsion, shock, damp heat, dust, salt mist and strain relief as referenced to IEC 61300 parts.
Sample preparation
- Samples shall be terminated onto single‑mode fibres per IEC 60793‑2‑50 types B1.1, B1.3 or B6 and cable formats per IEC 60794‑2‑50.

Applications and users

IEC 61753-052-3 is relevant to:

Manufacturers of fixed fibre attenuators for product design, validation and quality control.
Test laboratories performing type and batch verification for uncontrolled (field) installations.
System integrators, network operators and procurement teams who need to specify attenuator performance and acceptance criteria for passive optical links deployed in uncontrolled environments (outdoor enclosures, field panels, splice assemblies).

Typical applications include fixed attenuation in single‑mode fibre links where devices are permanently terminated to fibre and exposed to uncontrolled environmental conditions.

Related standards

IEC 60869‑1 - Generic specification for optical attenuators
IEC 61300 series - Basic test and measurement procedures (vibration, PDL, return loss, transient loss, etc.)
IEC 60793‑2‑50, IEC 60794‑2‑50 - Fibre and cable product/termination specifications

Keywords: non‑connectorized fixed attenuator devices, Category U in uncontrolled environments, IEC 61753‑052‑3, single‑mode fibre attenuator, attenuation tolerance, return loss, PDL.

IEC 61753-052-3:2016 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement proce…

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7…

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Examinati…

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1…

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Basic test and measurement proce…

Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres

Optical fibre cables - Indoor cables. Family specification for simplex and duplex cables for use in terminate…