IEC 61753-381-2:2016 PDF

Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment)

Название (английский):

IEC 61753-381-2:2016

Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 38
Дата публикации:: 5 января 2016 г.
Издание:: IEC IS 61753 edition 1 version 1
ICS:: 01

Тип поставки:

Full version570 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:7 раб. дн. (перевод)

Цена:570 €

Описание (английский):

IEC 61753-381-2:2016 contains the minimum initial test and measurement requirements and severities which a Gaussian-passband-profile cyclic arrayed waveguide grating (AWG) for single-mode and bidirectional transmission systems satisfies in order to be categorised as meeting the requirements of IEC 61753-1 for category C (controlled environment). This standard pertains to wavelength division multiplexing (WDM) network with multiple spectral-band usage. This standard covers the requirements of cyclic AWG devices with free spectral range (FSR) characteristics to ensure multiple spectral bands transmission performance, with single-mode non-connectorised pigtails and no electric circuit board. Keywords: Gaussian-passband-profile cyclic arrayed waveguide grating (AWG), wavelength division multiplexing (WDM), category C (controlled environment)

Технические детали

Технический комитет: SC 86B - Fibre optic interconnecting devices and passive components
SKU: IEC 61753-381-2:2016

Abstract

Overview

IEC 61753-381-2:2016 defines the minimum initial test and measurement requirements and severities for Gaussian‑passband‑profile cyclic arrayed waveguide grating (AWG) devices intended for single‑mode, bidirectional transmission in wavelength division multiplexing (WDM) networks. The standard specifies what cyclic AWG components must satisfy to be classified under IEC 61753‑1 Category C (controlled environment). It targets cyclic AWGs with free spectral range (FSR) characteristics that support multiple spectral‑band usage, and applies to devices supplied with single‑mode non‑connectorised pigtails and no electric circuit board.

Key topics and requirements

Performance scope: Establishes the baseline initial tests and measurement parameters required for Gaussian‑passband‑profile cyclic AWGs used in WDM systems.
Device type: Covers cyclic AWG devices that provide repeated FSR bands for transmission across multiple spectral bands.
Transmission modes: Intended for single‑mode and bidirectional transmission scenarios common in WDM deployments.
Environmental classification: Aligns device verification to Category C (controlled environment) as defined in IEC 61753‑1 - suitable for stable indoor environments with controlled conditions.
Physical constraints: Applies to AWG components with non‑connectorised single‑mode pigtails and that do not contain electric circuit boards (pure passive optical components).
Test intent (high level): Specifies minimum initial measurement activities and severity levels needed to demonstrate compliance with IEC 61753‑1 Category C. (Note: the standard text contains the detailed test definitions and severities.)

Applications

Procurement specifications for passive optical components in WDM networks that require predictable multi‑band FSR behavior.
Design verification and factory acceptance testing of cyclic AWG modules for metro, access or transport networks using multiple spectral bands.
Manufacturer quality assurance to demonstrate compliance with IEC 61753 performance categories for controlled environments.
Test laboratories and system integrators validating AWG performance for single‑mode, bidirectional WDM links.

Who uses this standard

Optical component manufacturers (AWG vendors)
Test and certification laboratories
Network equipment manufacturers and system integrators
Procurement/specification engineers for telecom operators and data center links
QA teams responsible for passive WDM component acceptance

Related standards

IEC 61753‑1 - performance category definitions (Category C = controlled environment) - referenced by this part as the classification framework.

Keywords: Gaussian‑passband‑profile cyclic arrayed waveguide grating (AWG), wavelength division multiplexing (WDM), category C (controlled environment), cyclic AWG, free spectral range (FSR), single‑mode pigtails.

Overview

Key topics and requirements

Performance scope: Establishes the baseline initial tests and measurement parameters required for Gaussian‑passband‑profile cyclic AWGs used in WDM systems.
Device type: Covers cyclic AWG devices that provide repeated FSR bands for transmission across multiple spectral bands.
Transmission modes: Intended for single‑mode and bidirectional transmission scenarios common in WDM deployments.
Environmental classification: Aligns device verification to Category C (controlled environment) as defined in IEC 61753‑1 - suitable for stable indoor environments with controlled conditions.
Physical constraints: Applies to AWG components with non‑connectorised single‑mode pigtails and that do not contain electric circuit boards (pure passive optical components).
Test intent (high level): Specifies minimum initial measurement activities and severity levels needed to demonstrate compliance with IEC 61753‑1 Category C. (Note: the standard text contains the detailed test definitions and severities.)

Applications

Procurement specifications for passive optical components in WDM networks that require predictable multi‑band FSR behavior.
Design verification and factory acceptance testing of cyclic AWG modules for metro, access or transport networks using multiple spectral bands.
Manufacturer quality assurance to demonstrate compliance with IEC 61753 performance categories for controlled environments.
Test laboratories and system integrators validating AWG performance for single‑mode, bidirectional WDM links.

Who uses this standard

Optical component manufacturers (AWG vendors)
Test and certification laboratories
Network equipment manufacturers and system integrators
Procurement/specification engineers for telecom operators and data center links
QA teams responsible for passive WDM component acceptance

Related standards

IEC 61753‑1 - performance category definitions (Category C = controlled environment) - referenced by this part as the classification framework.

IEC 61753-381-2:2016 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Applications

Who uses this standard

Related standards

Похожие стандарты

Abstract

Overview

Key topics and requirements

Applications

Who uses this standard

Related standards

Похожие стандарты

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: G…

Corrigendum 1 - Fibre optic interconnecting devices and passive components performance standard - Part 084-2:…

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility

Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for…

Corrigendum 1 - Photovoltaic (PV) modules - Ammonia corrosion testing

Corrigendum 1 - Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, fr…

Corrigendum 2 - Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers

Corrigendum 1 - Live working - Eye, face and head protectors against the effects of electric arc - Performanc…