Overview
IEC 61754-4:2013 specifies the standard interface dimensions for the Type SC connector family used in fibre‑optic interconnecting devices and passive components. This second edition (2013, with the January 2014 corrigendum included) replaces the 1997 edition and introduces duplex plug and adaptor interfaces plus a re‑evaluation of the standard’s overall content. The standard defines mechanical datums, optical datums and dimensional limits for SC plugs, adaptors and active‑device receptacles (simplex and duplex; PC and APC forms).
Key topics and technical requirements
- Nominal ferrule diameter: the Type SC parent connector uses a 2.50 mm nominal ferrule.
- Coupling mechanism: push–pull (spring‑loaded) coupling with a single male key for orientation and retention.
- Alignment: resilient sleeve alignment mechanism; mechanical datums and optical datums are defined to locate the ferrule endface precisely.
- PC vs APC: separate interfaces for PC (physical contact, spherically polished) and APC (angled PC, typically 8°) endfaces; APC and PC interfaces are not mutually mateable.
- Simplex and duplex interfaces: the edition adds duplex plug and adaptor interface definitions (mechanical and dimensional drawings and tables).
- Active device receptacles: standard interface dimensions for receptacles that accept SC plugs and position the optical datum for active components (transceivers, instrument ports).
- Intermateability: the document defines which plug types mate with which adaptor/receptacle types (PC ↔ PC, APC ↔ APC; mixed mating is restricted).
- Normative references: includes related optical interface standards such as IEC 61755‑3‑1 and IEC 61755‑3‑2 for ferrule endface forms.
(Where specified in the standard, certain dimensional and force values are provided - e.g., ferrule compression force ranges and detailed dimensional tables and grades for critical features.)
Practical applications and users
Who uses IEC 61754‑4:
- Fibre‑optic connector and adapter manufacturers (mechanical design and tooling)
- Transceiver, active device and instrument designers (receptacle interfaces)
- Patch panel, chassis and telecommunication equipment OEMs
- Test labs, conformity assessors and procurement/spec writers
- Data center, FTTH, telecom and datacom system integrators specifying mechanical compatibility
Why it matters:
- Ensures mechanical interchangeability of SC plugs, adaptors and device ports
- Reduces risk of mis‑mating PC vs APC connectors
- Supports reliable optical alignment and repeatable field connections in telecom and datacom deployments
Related standards
- IEC 61755‑3‑1 - Fibre optic connector optical interfaces (2.5 mm & 1.25 mm PC ferrules)
- IEC 61755‑3‑2 - Fibre optic connector optical interfaces (8° APC ferrules)
- Other parts of the IEC 61754 series (connector families and interfaces)
Keywords: IEC 61754‑4:2013, Type SC connector family, standard interface dimensions for type SC family of connectors, SC connector interfaces, fibre optic connector standards.