IEC 62442-2:2018 PDF

Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear

Название (английский):

IEC 62442-2:2018

Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 40
Дата публикации:: 3 мая 2018 г.
Издание:: IEC IS 62442 edition 2 version 1
ICS:: 29.140.99

Тип поставки:

Full version600 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:7 раб. дн. (перевод)

Цена:600 €

Описание (английский):

IEC 62442-2:2018 defines a measurement method of the power losses of electromagnetic controlgear, the total input power and the standby power of electronic controlgear for high intensity discharged lamps (excluding fluorescent lamps). A calculation method of the efficiency of controlgear for high intensity discharged lamp(s) is also defined. It is assumed that the controlgear are designed for use on DC supplies up to 1 000 V and/or AC supplies up to 1 000 V at 50 Hz or 60 Hz. This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision and has been harmonized with IEC 62442-1 and IEC 62442-3.

Технические детали

Технический комитет: SC 34C - Auxiliaries for lamps
SKU: IEC 62442-2:2018

Abstract

Overview - IEC 62442-2:2018 (Energy performance of lamp controlgear)

IEC 62442-2:2018 specifies a standardized method of measurement and calculation to determine the energy performance and efficiency of controlgear used with high intensity discharge (HID) lamps (excluding fluorescent lamps). This second edition (2018) replaces the 2014 edition and has been harmonized with IEC 62442‑1 and IEC 62442‑3. The standard covers measurement of:

Power losses for electromagnetic (wire‑wound) controlgear
Total input power and standby power for electronic controlgear
A calculation method to derive controlgear efficiency for HID lamp circuits

IEC 62442-2 assumes controlgear designed for DC or AC supplies up to 1 000 V at 50 Hz or 60 Hz and applies to controlgear–lamp circuits where the circuit is comprised solely of the controlgear and the lamp(s).

Key topics and technical requirements

Measurement setups: Defined test arrangements for electromagnetic (magnetic wire‑wound) and electronic controlgear including schematic configurations and required instrument accuracy.
Efficiency calculation: Procedures to calculate controlgear efficiency (ratio of lamp output power to input power) with sensors, network connections and auxiliary loads disconnected or excluded.
Standby power: Definition of standby mode and standardized method to measure average standby power of electronic controlgear.
Applicability and exclusions: Not applicable to controlgear integral to lamps, controlgear circuits with series capacitors, or controllable wire‑wound electromagnetic controlgear.
Test conditions and uncertainty: Guidance on supply voltage waveform, sampling, measurement uncertainty and instrument calibration in line with IEC Guide 115.
Harmonization: Aligned with IEC 62442‑1 and IEC 62442‑3 and references to IEC 61347‑1, IEC 61347‑2‑9 and IEC 61347‑2‑12.

Practical applications - who uses IEC 62442-2:2018

Manufacturers of HID electronic and electromagnetic ballasts/controlgear - to validate product energy performance and prepare technical data.
Independent test laboratories and certification bodies - to run repeatable, comparable efficiency and standby power tests.
Lighting designers and luminaire manufacturers - to select compatible, energy‑efficient controlgear for HID installations.
Procurement, regulatory and energy efficiency programs - to set specifications, compliance criteria, and label performance claims.

Related standards

IEC 62442‑1 (series general principles)
IEC 62442‑3 (other lamp types or measurement details)
IEC 61347‑1, IEC 61347‑2‑9, IEC 61347‑2‑12 (lamp controlgear safety and particular requirements)
IEC Guide 115 (measurement uncertainty for conformity assessment)

Keywords: IEC 62442-2:2018, lamp controlgear efficiency, high intensity discharge lamps, controlgear measurement method, standby power, electromagnetic controlgear, electronic controlgear.

Overview - IEC 62442-2:2018 (Energy performance of lamp controlgear)

Power losses for electromagnetic (wire‑wound) controlgear
Total input power and standby power for electronic controlgear
A calculation method to derive controlgear efficiency for HID lamp circuits

Key topics and technical requirements

Measurement setups: Defined test arrangements for electromagnetic (magnetic wire‑wound) and electronic controlgear including schematic configurations and required instrument accuracy.
Efficiency calculation: Procedures to calculate controlgear efficiency (ratio of lamp output power to input power) with sensors, network connections and auxiliary loads disconnected or excluded.
Standby power: Definition of standby mode and standardized method to measure average standby power of electronic controlgear.
Applicability and exclusions: Not applicable to controlgear integral to lamps, controlgear circuits with series capacitors, or controllable wire‑wound electromagnetic controlgear.
Test conditions and uncertainty: Guidance on supply voltage waveform, sampling, measurement uncertainty and instrument calibration in line with IEC Guide 115.
Harmonization: Aligned with IEC 62442‑1 and IEC 62442‑3 and references to IEC 61347‑1, IEC 61347‑2‑9 and IEC 61347‑2‑12.

Practical applications - who uses IEC 62442-2:2018

Manufacturers of HID electronic and electromagnetic ballasts/controlgear - to validate product energy performance and prepare technical data.
Independent test laboratories and certification bodies - to run repeatable, comparable efficiency and standby power tests.
Lighting designers and luminaire manufacturers - to select compatible, energy‑efficient controlgear for HID installations.
Procurement, regulatory and energy efficiency programs - to set specifications, compliance criteria, and label performance claims.

Related standards

IEC 62442‑1 (series general principles)
IEC 62442‑3 (other lamp types or measurement details)
IEC 61347‑1, IEC 61347‑2‑9, IEC 61347‑2‑12 (lamp controlgear safety and particular requirements)
IEC Guide 115 (measurement uncertainty for conformity assessment)

Keywords: IEC 62442-2:2018, lamp controlgear efficiency, high intensity discharge lamps, controlgear measurement method, standby power, electromagnetic controlgear, electronic controlgear.

IEC 62442-2:2018 PDF

Технические детали

Abstract

Overview - IEC 62442-2:2018 (Energy performance of lamp controlgear)

Key topics and technical requirements

Practical applications - who uses IEC 62442-2:2018

Related standards

Похожие стандарты

Abstract

Overview - IEC 62442-2:2018 (Energy performance of lamp controlgear)

Key topics and technical requirements

Practical applications - who uses IEC 62442-2:2018

Related standards

Похожие стандарты

Energy performance of lamp controlgear - Controlgear for fluorescent lamps. Method of measurement to determin…

Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources…

Energy performance of lamp controlgear - Controlgear for discharge lamps (excluding low-pressure mercury fluo…

Amendment 1 - Lamp controlgear - Part 1: General and safety requirements

Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (exc…

Controlgear for electric light sources - Safety - Part 2-1: Particular requirements - Starting devices (other…