IEC 62908-12-10:2017 PDF

Touch and interactive displays - Part 12-10: Measurement methods of touch displays - Touch and electrical performance

Название (английский):

IEC 62908-12-10:2017

Touch and interactive displays - Part 12-10: Measurement methods of touch displays - Touch and electrical performance

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 34
Дата публикации:: 8 июня 2017 г.
Издание:: IEC IS 62908 edition 1 version 1
ICS:: 11.040.10

Тип поставки:

Full version510 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:6 раб. дн. (перевод)

Цена:510 €

Описание (английский):

IEC 62908-12-10:2017(E) specifies the standard measuring conditions and methods for determining touch performance of a touch sensor module. This document is applicable to touch sensor modules, where the structural relationship between touch sensor, touch controller, touch sensor module, display panel, touch display panel, and touch display module is defined in IEC 62908-1-2. The contents of the corrigendum of November 2018 have been included in this copy.

Технические детали

Технический комитет: TC 110 - Electronic displays
SKU: IEC 62908-12-10:2017

Abstract

Overview

Standard Reference: IEC 62908-12-10:2017 Title: Touch and interactive displays - Part 12-10: Measurement methods of touch displays - Touch and electrical performance (corrigendum Nov 2018 included)

IEC 62908-12-10:2017 specifies standard measuring conditions and methods for determining the touch performance and electrical performance of a touch sensor module. It applies to touch sensor modules whose structural relationship (sensor, controller, module, display panel, touch display panel, touch display module) is defined in IEC 62908-1-2. The standard defines environmental and positioning conditions, test tools, and repeatable procedures for laboratory and production test environments.

Key topics and technical requirements

The standard defines measurement methods and reporting for a comprehensive set of touch and electrical performance metrics, including:

Standard measuring conditions
- Environmental and atmospheric reference conditions
- Standard positioning equipment and a human-operator alternative
- Test bar size, shape and material parameters
Touch performance tests
- Accuracy - position error measurement and reporting
- Repeatability / jitter - short-term position stability
- Linearity - deviation along dragged lines
- Reproducibility - consistency across sessions and velocities
- Signal-to-noise ratio (SNR) - touch signal vs. background noise
- Report rate - reporting frequency under specified conditions
- Latency - time from physical event to reported touch
- Electrical noise immunity - response to external electrical interference
- Water droplet immunity - touch behavior in presence of droplets
- Optical noise immunity - behavior under ambient/LED lighting
- Power consumption - measurement procedures for power draw
- Perpendicular touch / hover distance - detection thresholds for proximity
Electrical performance (Annex A)
- Resistance measurements of sensor structures
- Trans-capacitance measurements and procedures
- Required test samples, measurement equipment (e.g., LCR meters), procedures and reporting formats

The document includes figures, test grids and reporting guidance to ensure reproducible, comparable results.

Applications and who uses it

This standard is essential for stakeholders involved in design, manufacture, integration and validation of touch-enabled displays:

Display manufacturers and touch sensor vendors - for design verification and specification compliance
Touch controller and module designers - to validate firmware/hardware performance
Test laboratories and QA teams - to run repeatable production and acceptance tests
System integrators and OEMs - to assess touch performance in final products
Procurement and compliance teams - to specify measurable acceptance criteria

Using IEC 62908-12-10 helps reduce field failures, enable fair vendor comparisons, and support claims about accuracy, latency, robustness to water or electrical noise, and power efficiency.

Related standards

IEC 62908-1-2 - defines structural relationships of touch sensor modules referenced by this part
The document is part of the IEC 62908 series on touch and interactive displays.

Overview

Key topics and technical requirements

The standard defines measurement methods and reporting for a comprehensive set of touch and electrical performance metrics, including:

Standard measuring conditions
- Environmental and atmospheric reference conditions
- Standard positioning equipment and a human-operator alternative
- Test bar size, shape and material parameters
Touch performance tests
- Accuracy - position error measurement and reporting
- Repeatability / jitter - short-term position stability
- Linearity - deviation along dragged lines
- Reproducibility - consistency across sessions and velocities
- Signal-to-noise ratio (SNR) - touch signal vs. background noise
- Report rate - reporting frequency under specified conditions
- Latency - time from physical event to reported touch
- Electrical noise immunity - response to external electrical interference
- Water droplet immunity - touch behavior in presence of droplets
- Optical noise immunity - behavior under ambient/LED lighting
- Power consumption - measurement procedures for power draw
- Perpendicular touch / hover distance - detection thresholds for proximity
Electrical performance (Annex A)
- Resistance measurements of sensor structures
- Trans-capacitance measurements and procedures
- Required test samples, measurement equipment (e.g., LCR meters), procedures and reporting formats

The document includes figures, test grids and reporting guidance to ensure reproducible, comparable results.

Applications and who uses it

This standard is essential for stakeholders involved in design, manufacture, integration and validation of touch-enabled displays:

Display manufacturers and touch sensor vendors - for design verification and specification compliance
Touch controller and module designers - to validate firmware/hardware performance
Test laboratories and QA teams - to run repeatable production and acceptance tests
System integrators and OEMs - to assess touch performance in final products
Procurement and compliance teams - to specify measurable acceptance criteria

Using IEC 62908-12-10 helps reduce field failures, enable fair vendor comparisons, and support claims about accuracy, latency, robustness to water or electrical noise, and power efficiency.

Related standards

IEC 62908-1-2 - defines structural relationships of touch sensor modules referenced by this part
The document is part of the IEC 62908 series on touch and interactive displays.

IEC 62908-12-10:2017 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Похожие стандарты

Corrigendum 1 - Touch and interactive displays - Part 12-10: Measurement methods of touch displays - Touch an…

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility

Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for…

Corrigendum 1 - Fibre optic interconnecting devices and passive components performance standard - Part 084-2:…

Corrigendum 1 - Photovoltaic (PV) modules - Ammonia corrosion testing

Corrigendum 1 - Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, fr…

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: G…

Corrigendum 2 - Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers