Overview
IEC PAS 61191-10:2022 - Printed board assemblies, Part 10 - provides practical guidelines for the selection, application and utilization of protective coatings (conformal coatings) for electronic assemblies. Published as a Publicly Available Specification by the IEC, it covers requirements for coating materials, film properties, substrate preparation, application processes, handling, testing and repair. The guidance helps control the coating process from PCB layout through functional testing after coating, with emphasis on corrosion protection and long‑term reliability.
Key Topics and Requirements
- Coating types and classification: covers binding agents and chemistry such as acrylates, alkyds, epoxides, polyesters, polyurethanes, silicones, UV-acrylic hybrids, ORMOCER®s and parylenes, plus solvent-based vs. solvent-free and curing mechanisms (physical, oxidative, chemical, UV).
- Film properties: mechanical (adhesion, elasticity, hardness), electrical insulation and moisture resistance, thermal behavior (CTE, thermal stress, fatigue), condensation and water uptake.
- Substrate and pretreatment: cleaning requirements, decision criteria for cleaning, measurement of ionic contaminants, SIR (surface insulation resistance) testing, ZESTRON® flux/resin tests and surface tension/technical cleanliness checks.
- Application methods: brush, spray cans, manual/robotic spraying, dipping (vertical/horizontal), flood/form cup, selective/automatic coating, non‑contact jetting, vacuum processes and dispensing.
- Process control and handling: coating room requirements, explosion/ventilation considerations, storage, viscosity/temperature monitoring, aging, contamination control and maintenance.
- Testing and qualification: coating adhesion, thickness measurement, climate resistance (water immersion, condensation, climate-cycle, Coating Reliability (CoRe) test), and thermal analysis for drying/curing.
- Repair and rework: chemical and mechanical stripping, soldering through coatings and re-coating recommendations.
- Regulatory and environmental: VOC limits, workplace hazardous substance considerations and air-pollution regulations.
Applications and Who Uses It
IEC PAS 61191-10 is aimed at professionals involved with PCB and electronic assembly reliability:
- PCB designers and electronics engineers - for layout considerations that affect coating performance.
- Manufacturing/process engineers - to select methods (selective coating vs. dip/flood) and establish process controls.
- Quality, test labs and reliability engineers - for test selection and acceptance criteria.
- Coating manufacturers and suppliers - to align product properties with industry requirements.
- Sectors: automotive, aerospace, telecommunications, industrial controls, consumer electronics where corrosion protection, humidity resistance and long-term reliability are critical.
Related Guidance
This IEC PAS complements industry guidance and is explicitly compared with IPC guidance in its annexes-use it alongside national regulations and supplier datasheets when developing coating specifications and process controls.
Keywords: IEC PAS 61191-10, protective coatings, conformal coating, printed board assemblies, PCB coating, corrosion protection, coating application, coating testing.