IEC TR 63368:2024 PDF

Control and protection systems for high-voltage direct current (HVDC) power transmission systems - Off-site real-time simulation testing

Название (английский):

IEC TR 63368:2024

Control and protection systems for high-voltage direct current (HVDC) power transmission systems - Off-site real-time simulation testing

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 30
Дата публикации:: 27 сентября 2024 г.
Издание:: IEC TR 63368 edition 1 version 1
ICS:: 29.240.99

Тип поставки:

Full version450 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:5 раб. дн. (перевод)

Цена:450 €

Описание (английский):

IEC TR 63368:2024 provides guidance on off-site real-time simulation tests of control and protection (C&P) systems for HVDC power transmission systems. The off-site real-time simulation tests are carried out after the testing of C&P devices and prior to on-site system tests. This document covers point-to-point, back-to-back, and multi-terminal HVDC systems of line commutated converters (LCC), voltage-sourced converters (VSC) and hybrid HVDC technologies. In order to provide practical guidance for the functional performance tests of HVDC power transmission systems, this document covers the test environment, the contents and methods of functional performance tests, and the test report.

Технические детали

Технический комитет: SC 22F - Power electronics for electrical transmission and distribution systems
SKU: IEC TR 63368:2024

Abstract

Overview

IEC TR 63368:2024 - Control and protection systems for high-voltage direct current (HVDC) power transmission systems – Off-site real-time simulation testing - is an IEC Technical Report that provides practical guidance for off-site, real-time simulation tests of HVDC control and protection (C&P) systems. It is intended for use after individual C&P device testing and prior to on-site commissioning. The report covers point-to-point, back-to-back and multi‑terminal HVDC configurations using line-commutated converters (LCC), voltage‑sourced converters (VSC) and hybrid HVDC technologies.

Key topics and technical requirements

The document organizes tests and requirements into a coherent test program, covering:

Test environment
- Real‑time simulator requirements, simulation interface devices and simulation models.
- Interface and wiring/setup for connecting actual C&P devices to the simulator.
C&P system components for testing
- Control devices, protection relays, measurement and monitoring equipment, fault recorders and valve base control devices.
Functional performance tests (FPT)
- Steady‑state control tests: energization sequences, reactive power control, tap‑changer behavior, power ramping and overload checks.
- Dynamic control tests: power/current/voltage step responses, gamma steps, AC‑system related tests including AC disturbance and AC/DC interaction, stability control and restoration scenarios.
- Protection tests: trip‑logic, converter‑area, DC bus, DC line and filter protection, switch protection and other protection areas.
- Redundancy and reliability: redundant system failure tests, monitoring/switching behavior and optional electromagnetic interference (EMI) and IT security checks.
- VSC‑specific tests: control system delay assessments, valve control/protection functions and STATCOM behavior.
Test reporting
- Recommended contents and structure of the off‑site real‑time simulation test report.
Informative annexes
- Examples of protection areas and faults and a sample method for control system delay testing.

Practical applications and target users

IEC TR 63368:2024 is aimed at organizations involved in HVDC system validation and commissioning, including:

HVDC OEMs and system integrators conducting off‑site factory acceptance testing
Transmission utilities and grid operators preparing pre‑commissioning validation
Third‑party test laboratories and independent verification teams
Protection and control engineers designing test procedures and acceptance criteria
Consultants and project managers coordinating C&P validation prior to on‑site tests

The guidance helps reduce on‑site risk, accelerate commissioning, validate control/protection logic and demonstrate compliance with project requirements and grid code obligations.

Related standards

Published by IEC TC 22F (Power electronics for transmission and distribution).
The report references related IEC guidance and examples (e.g., IEC/TR 60919‑2 in illustrative figures); users should consult applicable IEC standards and grid codes for normative requirements when preparing tests.

Overview

Key topics and technical requirements

The document organizes tests and requirements into a coherent test program, covering:

Test environment
- Real‑time simulator requirements, simulation interface devices and simulation models.
- Interface and wiring/setup for connecting actual C&P devices to the simulator.
C&P system components for testing
- Control devices, protection relays, measurement and monitoring equipment, fault recorders and valve base control devices.
Functional performance tests (FPT)
- Steady‑state control tests: energization sequences, reactive power control, tap‑changer behavior, power ramping and overload checks.
- Dynamic control tests: power/current/voltage step responses, gamma steps, AC‑system related tests including AC disturbance and AC/DC interaction, stability control and restoration scenarios.
- Protection tests: trip‑logic, converter‑area, DC bus, DC line and filter protection, switch protection and other protection areas.
- Redundancy and reliability: redundant system failure tests, monitoring/switching behavior and optional electromagnetic interference (EMI) and IT security checks.
- VSC‑specific tests: control system delay assessments, valve control/protection functions and STATCOM behavior.
Test reporting
- Recommended contents and structure of the off‑site real‑time simulation test report.
Informative annexes
- Examples of protection areas and faults and a sample method for control system delay testing.

Practical applications and target users

IEC TR 63368:2024 is aimed at organizations involved in HVDC system validation and commissioning, including:

HVDC OEMs and system integrators conducting off‑site factory acceptance testing
Transmission utilities and grid operators preparing pre‑commissioning validation
Third‑party test laboratories and independent verification teams
Protection and control engineers designing test procedures and acceptance criteria
Consultants and project managers coordinating C&P validation prior to on‑site tests

The guidance helps reduce on‑site risk, accelerate commissioning, validate control/protection logic and demonstrate compliance with project requirements and grid code obligations.

Related standards

Published by IEC TC 22F (Power electronics for transmission and distribution).
The report references related IEC guidance and examples (e.g., IEC/TR 60919‑2 in illustrative figures); users should consult applicable IEC standards and grid codes for normative requirements when preparing tests.

IEC TR 63368:2024 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Practical applications and target users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Practical applications and target users

Related standards

Похожие стандарты

Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 161: Electromagnetic compatibility

Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for…

Corrigendum 1 - Fibre optic interconnecting devices and passive components performance standard - Part 084-2:…

Corrigendum 1 - Photovoltaic (PV) modules - Ammonia corrosion testing

Corrigendum 1 - Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, fr…

Corrigendum 1 - Fibre optic interconnecting devices and passive components - Performance standard - Part 1: G…

Corrigendum 2 - Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers

Corrigendum 1 - Live working - Eye, face and head protectors against the effects of electric arc - Performanc…