ISO 1042:1998 PDF

Laboratory glassware — One-mark volumetric flasks

Название (английский):

ISO 1042:1998

Laboratory glassware — One-mark volumetric flasks

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 2 июля 1998 г.
Издание:: ISO IS 1042 edition 4 version 1
ICS:: 17.060

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

La présente Norme internationale spécifie les exigences d'une série de fioles jaugées à un trait, acceptable sur le plan international et satisfaisant aux besoins généraux des laboratoires.Les spécifications de la présente Norme internationale sont conformes à l'ISO 384 ainsi qu'à la Recommandation internationale N° 4 de l'OIML.

Технические детали

Технический комитет: ISO/TC 48 - Laboratory equipment
SKU: ISO 1042:1998

Abstract

Overview

ISO 1042:1998 - "Laboratory glassware - One-mark volumetric flasks" specifies an internationally accepted series of one‑mark volumetric flasks for general laboratory use. Published as the fourth edition (1998), it updates earlier editions by adding new capacities (including 1, 2, 20 and 5 000 ml), permitting conical and wider‑neck shapes, tightening material definitions and introducing a capacity test method. The standard defines capacity, reference temperature, classes of accuracy, essential dimensions and marking requirements for narrow‑ and wide‑neck volumetric flasks.

Key topics and technical requirements

Capacities covered: 1, 2, 5, 10, 20, 25, 50, 100, 200, 250, 500, 1 000, 2 000 and 5 000 ml.
Classes of accuracy: Class A (higher grade) and Class B (lower grade). Wide‑neck variants are designated AW / BW.
Reference temperature: Standard reference is 20 °C (27 °C may be substituted where adopted nationally).
Material: Glass must meet hydrolytic class not lower than HGB3 per ISO 719 and have a coefficient of thermal expansion ≤ 3.3 × 10−6 K−1 (includes borosilicate glass 3.3).
Dimensions & tolerances: Essential internal neck diameters, graduation‑line distances and overall dimensions are specified (see tables for narrow‑ and wide‑neck values). Graduation line thickness ≤ 0.4 mm.
Shape & stability: Body may be pear‑shaped or conical; flasks ≥ 25 ml must not topple on a 15° incline (10° for

Overview

Key topics and technical requirements

Capacities covered: 1, 2, 5, 10, 20, 25, 50, 100, 200, 250, 500, 1 000, 2 000 and 5 000 ml.
Classes of accuracy: Class A (higher grade) and Class B (lower grade). Wide‑neck variants are designated AW / BW.
Reference temperature: Standard reference is 20 °C (27 °C may be substituted where adopted nationally).
Material: Glass must meet hydrolytic class not lower than HGB3 per ISO 719 and have a coefficient of thermal expansion ≤ 3.3 × 10−6 K−1 (includes borosilicate glass 3.3).
Dimensions & tolerances: Essential internal neck diameters, graduation‑line distances and overall dimensions are specified (see tables for narrow‑ and wide‑neck values). Graduation line thickness ≤ 0.4 mm.
Shape & stability: Body may be pear‑shaped or conical; flasks ≥ 25 ml must not topple on a 15° incline (10° for

ISO 1042:1998 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Neurosurgical implants - Sterile, single-use hydrocephalus shunts (ISO 7197:2024)

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines