ISO 10483-2:1996 PDF

Road vehicles — Intelligent power switches — Part 2: Low-side intelligent power switch

Название (английский):

ISO 10483-2:1996

Road vehicles — Intelligent power switches — Part 2: Low-side intelligent power switch

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 24
Дата публикации:: 1 февраля 1996 г.
Издание:: ISO IS 10483 edition 1 version 1
ICS:: 43.040.10

Тип поставки:

Full version360 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:360 €

Описание (английский):

Specifies the minimum requirements for 12 V and 24 V body system low-side intelligent power switches (LSIPS) intended for road vehicles.

Технические детали

Технический комитет: ISO/TC 22/SC 32 - Electrical and electronic components and general system aspects
SKU: ISO 10483-2:1996

Abstract

Overview

ISO 10483-2:1996 - Road vehicles - Intelligent power switches - Part 2: Low-side intelligent power switch (LSIPS) specifies the minimum requirements for 12 V and 24 V body‑system low‑side intelligent power switches used in road vehicles. Intended primarily for automotive loads such as lamps, motors and relays, the standard defines functional behavior, electrical requirements, test methods and packaging for semiconductor LSIPS devices.

Key topics and technical requirements

Functions: Defines two main LSIPS functions - the switching function and overcurrent/thermal self‑protection with a single Status bit for diagnostics.
Device variants: Battery‑connected control supply (LSIPS‑B) and regulated control supply (LSIPS‑R).
Status and input behavior:
- Positive logic input: logic “1” → on (except in overload); logic “0” or floating → off.
- Status output indicates open‑load or overload (logic “0”), otherwise logic “1”; Status is an open‑drain/open‑collector type.
Electrical limits:
- Supply/clamping: load pin clamping voltage > 40 V (12 V systems) or > 60 V (24 V systems); clamping threshold > 22 V (40 V).
- Case temperature: device must be functional across −40 °C to 125 °C (parameters may vary).
- Supply quiescent current:

Overview

Key topics and technical requirements

Functions: Defines two main LSIPS functions - the switching function and overcurrent/thermal self‑protection with a single Status bit for diagnostics.
Device variants: Battery‑connected control supply (LSIPS‑B) and regulated control supply (LSIPS‑R).
Status and input behavior:
- Positive logic input: logic “1” → on (except in overload); logic “0” or floating → off.
- Status output indicates open‑load or overload (logic “0”), otherwise logic “1”; Status is an open‑drain/open‑collector type.
Electrical limits:
- Supply/clamping: load pin clamping voltage > 40 V (12 V systems) or > 60 V (24 V systems); clamping threshold > 22 V (40 V).
- Case temperature: device must be functional across −40 °C to 125 °C (parameters may vary).
- Supply quiescent current:

ISO 10483-2:1996 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts