ISO 10545-12:1995 PDF

Ceramic tiles — Part 12: Determination of frost resistance

Название (английский):

ISO 10545-12:1995

Ceramic tiles — Part 12: Determination of frost resistance

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 2
Дата публикации:: 16 ноября 1995 г.
Издание:: ISO IS 10545 edition 1 version 1
ICS:: 91.100.23

Тип поставки:

Full version30 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:30 €

Описание (английский):

Specifies a method for determining the frost resistance of all ceramic tiles intended for use in freezing conditions in the presence of water.

Технические детали

Технический комитет: ISO/TC 189 - Ceramic tile
SKU: ISO 10545-12:1995

Abstract

Overview

ISO 10545-12:1995 specifies a laboratory test method to determine the frost resistance of ceramic tiles intended for use where freezing and thawing occur in the presence of water. The standard defines how to prepare test specimens, impregnate them with water, subject them to controlled freeze–thaw cycles, measure water absorption, and record visual damage. This test helps ensure tiles will resist damage from freeze–thaw exposure in service.

Key topics and technical requirements

Scope: Applies to all ceramic tiles intended for use in freezing conditions with water exposure.
Sample size: Minimum total area of 0.25 m² and at least 10 whole tiles, free from relevant defects (cracks, crazing, holes, nipped edges/corners) unless marked and reported.
Apparatus: Includes a drying oven (110 ±5 °C), a precision balance (≈0.01% accuracy), vacuum impregnation tank and pump, freezer capable of controlled air flow around tiles, thermocouple or equivalent temperature sensor, and chamois leather for surface drying.
Preparation: Tiles are dried to constant mass (mass change

Overview

Key topics and technical requirements

Scope: Applies to all ceramic tiles intended for use in freezing conditions with water exposure.
Sample size: Minimum total area of 0.25 m² and at least 10 whole tiles, free from relevant defects (cracks, crazing, holes, nipped edges/corners) unless marked and reported.
Apparatus: Includes a drying oven (110 ±5 °C), a precision balance (≈0.01% accuracy), vacuum impregnation tank and pump, freezer capable of controlled air flow around tiles, thermocouple or equivalent temperature sensor, and chamois leather for surface drying.
Preparation: Tiles are dried to constant mass (mass change

ISO 10545-12:1995 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts