Overview
ISO 11082:1992 defines a certification scheme for welded fabric (welded wire mesh) used as passive reinforcement in concrete structures. Intended for continuous production, the standard sets out the rules and procedures for demonstrating product conformity to the product standard (notably ISO 6935-3). The scheme covers three main stages: suitability testing, internal inspection by the manufacturer, and inspection and supervision by an external body.
Key topics and requirements
- Scope: Certification applies to continuous production of welded fabric for concrete reinforcement, verifying compliance with the relevant product requirements.
- Suitability testing (aptitude à l’emploi): Initial factory assessment of production capability, equipment, staff competence and test facilities. Sampling for type testing requires tests on multiple mesh types; for each type at least 30 samples from at least 5 t of a lot are taken to verify mechanical and geometric properties.
- Manufacturer internal control: Continuous production control with sampling by production partial-units (reception units up to 25 t). For long-term quality assessment, manufacturers must collect and statistically evaluate results once at least 200 test results are available or after 3 months of production, and often double internal test frequency during this period.
- Statistical acceptance: The standard requires statistical evaluation of test data. Individual results for reception must meet a factor of the characteristic value (e.g., individual value > 0.95 × characteristic value). Long-term quality is assessed using the mean, standard deviation and an acceptability index (k) (values supplied in the standard) to ensure specified reliability (example target: 5% failure at 90% confidence).
- External control and surveillance: Independent external inspection at intervals up to 6 months, including parallel testing (manufacturer vs external body) on representative sheets and corrective measures when nonconformities are found (warnings, intensified testing, production changes, withdrawal of approval).
- Certification outcome: On satisfactory results a factory symbol and producer approval/license are issued; continued compliance is monitored.
Applications
- Use for quality assurance and certification of welded wire mesh supplied for reinforced concrete (buildings, bridges, precast elements).
- Provides a framework for manufacturers to demonstrate consistent product quality and for purchasers/specifiers to require certified welded fabric.
- Supports material compliance checks linked to structural design and construction specifications.
Who uses this standard
- Manufacturers of welded fabric (welded wire mesh) for concrete reinforcement
- Certification bodies and external inspection organizations
- Construction material buyers, structural engineers, precast and reinforcement fabricators
- Regulators and quality managers involved in concrete construction projects
Related standards