ISO 12137:2011 PDF

Paints and varnishes — Determination of mar resistance

Название (английский):

ISO 12137:2011

Paints and varnishes — Determination of mar resistance

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 6 октября 2011 г.
Издание:: ISO IS 12137 edition 1 version 1
ICS:: 87.040

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

ISO 12137:2011 specifies a method for determining, using a curved (loop-shaped or ring-shaped) stylus, the mar resistance of a single coating of a paint, varnish or related product, or the upper layer of a multicoat system. This test has been found to be useful in comparing the mar resistance of different coatings. It is most useful in providing relative ratings for a series of coated panels exhibiting significant differences in mar resistance. ISO 12137 does not specify a method using a pointed stylus, two of which are specified in ISO 1528‑1 and ISO 1528‑2, respectively. The choice between the three methods will depend on the particular practical problem.

Технические детали

Технический комитет: ISO/TC 35/SC 9 - General test methods for paints and varnishes
SKU: ISO 12137:2011

Abstract

Overview

ISO 12137:2011 - Paints and varnishes - Determination of mar resistance - defines a laboratory test method to assess the mar resistance of a single coating or the upper layer of a multicoat system using a curved (loop-shaped or ring-shaped) stylus. The standard is intended for comparative testing and provides relative ratings for coatings that show significant differences in susceptibility to mar. It complements, but does not replace, pointed-stylus methods described in ISO 1518‑1 and ISO 1518‑2.

Key Topics and Requirements

Test principle: A loop- or ring-shaped stylus mounted at a 45° angle is pressed onto a coated test panel while the panel is moved beneath the stylus. Load is increased in steps until marring occurs.
Instrument and stylus:
- Balanced-beam mar-resistance instrument with capacity up to 5 kg and step resolution typically 0.5 kg (0.25 kg or 0.1 kg allowed for higher accuracy).
- Loop stylus: chromium-plated steel, 1.6 mm rod bent into U-shape, outside radius (3.25 ± 0.05) mm, hardened to Rockwell HRC56–58, surface roughness

Overview

Key Topics and Requirements

Test principle: A loop- or ring-shaped stylus mounted at a 45° angle is pressed onto a coated test panel while the panel is moved beneath the stylus. Load is increased in steps until marring occurs.
Instrument and stylus:
- Balanced-beam mar-resistance instrument with capacity up to 5 kg and step resolution typically 0.5 kg (0.25 kg or 0.1 kg allowed for higher accuracy).
- Loop stylus: chromium-plated steel, 1.6 mm rod bent into U-shape, outside radius (3.25 ± 0.05) mm, hardened to Rockwell HRC56–58, surface roughness

ISO 12137:2011 PDF

Технические детали

Abstract

Overview

Key Topics and Requirements

Похожие стандарты

Abstract

Overview

Key Topics and Requirements

Похожие стандарты

Paints and varnishes. Determination of release rate of biocides from antifouling paints. Determination of tra…

Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2019)

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies