Overview
ISO 12151-6:2009 specifies the general and dimensional requirements for hose fittings made of carbon steel with 60° cone ends (to mate with ISO 8434-6 connectors) for hose sizes 5 to 51 (per ISO 4397). Intended for hydraulic fluid power systems and general-pressure hose applications, the standard covers design, performance verification, manufacture, assembly instructions, marking and procurement information for hose fittings.
Key topics and technical requirements
- Scope and materials: Carbon steel hose fittings with 60° cone ends for nominated hose sizes; other materials permitted only by agreement between manufacturer and user.
- Interface and compatibility: Cone ends and mating tube/tubing interfaces conform to ISO 8434-6; hose size references follow ISO 4397.
- Performance testing: Hose assemblies must meet hose specification performance and pass pressure and cyclic endurance testing (hose tests per ISO 6605; fitting verification per ISO 19879). Rated working pressure is the lower of the connector (ISO 8434-6) and the hose specification.
- Design and dimensions: Detailed dimensional tables, typical fitting illustrations (straight, swivel, 45°/90° elbows), hex tolerances (ISO 4759-1 grade C) and angular tolerances are specified. Threads on connection ends are inch screw threads per ISO 228-1.
- Sealing styles: Letter-coded sealing styles (e.g., A = O-ring, B = non O-ring) and alphanumeric designation format (Hose fitting ISO 12151-6 - [code] - OD × ID) to standardize ordering and identification.
- Manufacture & workmanship: Acceptable manufacturing methods (forging, cold-forming, machining) and surface finish requirements (machined surfaces Ra max 6.3 µm).
- Corrosion protection: Carbon steel parts must be plated/coated to pass a 72 h salt spray test (ISO 9227); cadmium plating is prohibited.
- Assembly & marking: Manufacturers must supply assembly instructions (torques/wrench turns, tooling) and fittings must be permanently marked with manufacturer identification.
Practical applications
- Use in hydraulic fluid power systems (mobile and industrial hydraulics) where hoses with 60° cone end fittings are required.
- General-pressure hose systems in construction, agricultural equipment, material handling, and industrial machinery.
- Standardizes interchangeability and procurement for OEMs, hose-assembly manufacturers, distributors and maintenance shops.
Who should use this standard
- Design engineers and system integrators specifying hydraulic connections
- Hose and fitting manufacturers and quality engineers for design and testing
- Procurement specialists and spec writers creating purchase orders and product catalogs
- Test laboratories verifying pressure, cyclic and corrosion performance
Related standards
Keywords: ISO 12151-6, hose fittings, 60° cone ends, ISO 8434-6, hydraulic fluid power, carbon steel fittings, hose assemblies, ISO 4397.
