ISO 12646:2015 PDF

Graphic technology — Displays for colour proofing — Characteristics

Название (английский):

ISO 12646:2015

Graphic technology — Displays for colour proofing — Characteristics

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 17
Дата публикации:: 19 июня 2015 г.
Издание:: ISO IS 12646 edition 3 version 1
ICS:: 37.100.01

Тип поставки:

Full version255 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:255 €

Описание (английский):

ISO 12646:2015 specifies requirements for two conformance levels for the characteristics of displays to be used for soft proofing of colour images. Included are requirements for uniformity and variations of electro-optical properties with viewing direction for different driving signals.

Технические детали

Технический комитет: ISO/TC 130 - Graphic technology
SKU: ISO 12646:2015

Abstract

Overview

ISO 12646:2015 - Graphic technology - Displays for colour proofing - Characteristics defines requirements and test methods for displays used in soft proofing of colour images. The standard specifies two conformance levels (Class A and Class B) and addresses key electro‑optical properties such as uniformity, viewing‑angle behaviour, calibration aims and stabilization. Its purpose is to help manufacturers, colour managers and prepress professionals ensure that a display can reliably represent proofs intended to match hard‑copy output.

Key topics and technical requirements

Conformance levels: Two levels (Class A and Class B) are defined to address differing soft‑proofing needs (ISO 14861 compatibility is emphasized).
Calibration aims: Default calibration for testing is a luminance of 160 cd/m², white point at D50 (x=0.3457, y=0.3585, 2° observer) and gamma ≈ 2.2. Test results must report any deviation from these aims.
Stabilization (warm‑up): Displays must be operated in calibration mode for 12 hours in a controlled room (18–28 °C, ±0.5 °C). Stability is reached when luminance change

Overview

Key topics and technical requirements

Conformance levels: Two levels (Class A and Class B) are defined to address differing soft‑proofing needs (ISO 14861 compatibility is emphasized).
Calibration aims: Default calibration for testing is a luminance of 160 cd/m², white point at D50 (x=0.3457, y=0.3585, 2° observer) and gamma ≈ 2.2. Test results must report any deviation from these aims.
Stabilization (warm‑up): Displays must be operated in calibration mode for 12 hours in a controlled room (18–28 °C, ±0.5 °C). Stability is reached when luminance change

ISO 12646:2015 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Graphic technology — Requirements for colour soft proofing systems

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines