Overview
ISO 12683:2004 - "Mechanically deposited coatings of zinc - Specification and test methods" defines requirements and test methods for mechanically deposited zinc (mechanical zinc plating or matoplastie) applied to fabricated metal articles to provide corrosion protection. The standard covers classification, pre‑treatment, inspection, sampling, rejection criteria and attestation of conformity, plus informative and normative annexes on process details and zinc powder specification.
Key topics and requirements
- Scope and definitions: Describes mechanically deposited coatings (compacting zinc powder in a rotating barrel with impact media) and relevant terms such as apparent coating density.
- Information to be agreed: Purchaser and supplier must document substrate, tensile strength, service condition, coating class, supplementary finishes, inspection locations, sampling plan and any special appearance or packaging requirements.
- Classification and designation:
- Coatings are classified by minimum thickness (examples include Zn 6, Zn 12, Zn 25, Zn 50, Zn 80, Zn 110).
- Supplementary finishing types: Type 1 (as‑coated), Type 2 (chromate conversion - yellow/green/black), Type 3 (customer‑specified).
- Pretreatment requirements:
- Stress relief heat treatment for high‑strength steel when specified.
- Cleaning recommendations to reduce risk of hydrogen embrittlement (references to ISO 9587).
- Inspection and test methods:
- Visual appearance criteria (uniform silvery appearance, matte to medium bright lustre).
- Surface defect acceptance rules (substrate-origin defects not always cause for rejection).
- Thickness measurement methods (referenced standards such as ISO 1463, ISO 2177, ISO 3497).
- Adhesion, corrosion resistance (accelerated salt spray test, ISO 9227) and tests for absence of hydrogen embrittlement.
- Quality control: Sampling (ISO 2859‑1), rejection rules and attestation of conformity (inspection documentation).
Applications and who uses this standard
ISO 12683 is intended for:
- Metal finishers and coating processors who apply mechanical zinc coatings.
- Engineers, procurement specialists and specifiers writing corrosion‑protection requirements for fabricated metal parts.
- Quality assurance and inspection teams verifying coating thickness, adhesion and corrosion performance.
- Manufacturers of parts and assemblies requiring reproducible, documented zinc mechanical coatings for corrosion protection.
Typical practical use: specifying durable, non‑electrolytic zinc protection for fabricated components where electrical current or heat cannot be used, and where documented test methods and acceptance criteria are required.
Related standards
Key referenced standards include:
Keywords: ISO 12683, mechanically deposited zinc, mechanical zinc plating, corrosion protection, coating thickness, salt spray test, hydrogen embrittlement, chromate conversion.