ISO 12958-2:2020 PDF

Geotextiles and geotextile-related products — Determination of water flow capacity in their plane — Part 2: Performance test

Название (английский):

ISO 12958-2:2020

Geotextiles and geotextile-related products — Determination of water flow capacity in their plane — Part 2: Performance test

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 16
Дата публикации:: 21 октября 2020 г.
Издание:: ISO IS 12958 edition 1 version 1
ICS:: 59.080.70

Тип поставки:

Full version240 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:240 €

Описание (английский):

This document specifies a method for determining the constant-head water flow capacity within the plane of a geotextile or geotextile-related product, using boundary materials and test conditions of interest. A standard series of test conditions are proposed, involving soil confinement, low hydraulic gradients, seating times and an array of normal loads.

Технические детали

Технический комитет: ISO/TC 221 - Geosynthetics
SKU: ISO 12958-2:2020

Abstract

Overview

ISO 12958-2:2020 specifies a performance test method to determine the constant-head in-plane water flow capacity of geotextiles and geotextile-related products. The standard defines how to measure volumetric flow per unit width under representative field-like conditions using project-specific boundary materials (for example soils), a range of normal compressive stresses, seating times and low hydraulic gradients. It is intended to assess short- to mid-term performance (including primary creep effects) and to evaluate how contact with soils or confinement affects the product’s transmissivity.

Key Topics and Requirements

Test principle: measure steady-state flow within the plane of the geotextile at a constant head loss under defined stresses, gradient and boundary conditions.
Apparatus: constant-head in-plane flow cell capable of maintaining precise head loss; minimum useful dimensions (cell width ≥ 0.2 m, effective flow length ≥ 0.3 m); discharge head ≤ 100 mm.
Loading and control: loading mechanism must hold normal compressive stress with ≤1% or 1 kPa error; hydraulic head measurement requirements vary by gradient (pressure transducers required for gradients

Overview

Key Topics and Requirements

Test principle: measure steady-state flow within the plane of the geotextile at a constant head loss under defined stresses, gradient and boundary conditions.
Apparatus: constant-head in-plane flow cell capable of maintaining precise head loss; minimum useful dimensions (cell width ≥ 0.2 m, effective flow length ≥ 0.3 m); discharge head ≤ 100 mm.
Loading and control: loading mechanism must hold normal compressive stress with ≤1% or 1 kPa error; hydraulic head measurement requirements vary by gradient (pressure transducers required for gradients

ISO 12958-2:2020 PDF

Технические детали

Abstract

Overview

Key Topics and Requirements

Похожие стандарты

Abstract

Overview

Key Topics and Requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts