ISO 13007-1:2014 PDF

Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives

Название (английский):

ISO 13007-1:2014

Ceramic tiles — Grouts and adhesives — Part 1: Terms, definitions and specifications for adhesives

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 12 мая 2014 г.
Издание:: ISO IS 13007 edition 3 version 1
ICS:: 83.180

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

ISO 13007-1:2014 applies to ceramic tile adhesives for internal and external tile installations on walls and floors. ISO 13007-1:2014 gives the terminology, concerning the products, working methods, application properties, etc., for ceramic tile adhesives ISO 13007-1:2014 specifies the values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction resin (R) adhesives].

Технические детали

Технический комитет: ISO/TC 189 - Ceramic tile
SKU: ISO 13007-1:2014

Abstract

Overview

ISO 13007-1:2014 - Ceramic tiles - Grouts and adhesives - Part 1: Terms, definitions and specifications for adhesives - defines terminology, classification and minimum performance requirements for ceramic tile adhesives used for internal and external installations on walls and floors. The standard covers three adhesive types - cementitious (C), dispersion (D) and reaction resin (R) - and specifies required performance values (adhesion/shear strength, open time, slip, deformability, etc.) and designation rules for product labelling.

Key topics and technical requirements

Terminology and scope: Definitions for substrate, open time, pot-life, slip, adjustability, deformability and other core terms used across tile adhesive testing and specification.
Classification & designation: Adhesives are designated by type (C, D, R) plus class/characteristics (e.g., C1, C2, D2, R1, R2) and special symbols (F = fast setting, A = accelerated drying, T = slip resistant, E = extended open time, S = deformable, P = exterior plywood adhesion).
Performance thresholds (examples from the standard):
- Cementitious adhesives (C1): tensile adhesion strength ≥ 0.5 N/mm²; improved class C2: ≥ 1.0 N/mm².
- Dispersion adhesives (D1): shear adhesion strength ≥ 1.0 N/mm² (fundamental); D2 has higher/extra requirements.
- Reaction resin adhesives (R1): shear adhesion strength ≥ 2.0 N/mm².
- Open time: typical minimum specified is 20 minutes; Extended open time (E) ≥ 30 minutes; Fast setting (F) open time ≥ 10 minutes.
- Slip resistance (T): vertical slip ≤ 0.5 mm.
- Deformability (S): S1 ≥ 2.5 mm and

Overview

Key topics and technical requirements

Terminology and scope: Definitions for substrate, open time, pot-life, slip, adjustability, deformability and other core terms used across tile adhesive testing and specification.
Classification & designation: Adhesives are designated by type (C, D, R) plus class/characteristics (e.g., C1, C2, D2, R1, R2) and special symbols (F = fast setting, A = accelerated drying, T = slip resistant, E = extended open time, S = deformable, P = exterior plywood adhesion).
Performance thresholds (examples from the standard):
- Cementitious adhesives (C1): tensile adhesion strength ≥ 0.5 N/mm²; improved class C2: ≥ 1.0 N/mm².
- Dispersion adhesives (D1): shear adhesion strength ≥ 1.0 N/mm² (fundamental); D2 has higher/extra requirements.
- Reaction resin adhesives (R1): shear adhesion strength ≥ 2.0 N/mm².
- Open time: typical minimum specified is 20 minutes; Extended open time (E) ≥ 30 minutes; Fast setting (F) open time ≥ 10 minutes.
- Slip resistance (T): vertical slip ≤ 0.5 mm.
- Deformability (S): S1 ≥ 2.5 mm and

ISO 13007-1:2014 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts