ISO 13216-2:2004 PDF

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 2: Top tether anchorages and attachments

Название (английский):

ISO 13216-2:2004

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 2: Top tether anchorages and attachments

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 22
Дата публикации:: 29 ноября 2004 г.
Издание:: ISO IS 13216 edition 1 version 1
ICS:: 43.040.80

Тип поставки:

Full version330 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:330 €

Описание (английский):

ISO 13216-2:2004 establishes the positioning zones, dimensions and general and static-strength requirements for top tether anchorages used together with seat bight anchorages according to ISO 13216-1 or with other systems for anchoring child restraint systems (CRS) in road vehicles. It is applicable to child restraint systems intended for children with a mass of up to 22 kg.

Технические детали

Технический комитет: ISO/TC 22/SC 36 - Safety and impact testing
SKU: ISO 13216-2:2004

Abstract

Overview - ISO 13216-2:2004 (Top tether anchorages)

ISO 13216-2:2004 specifies top tether anchorages and attachments for child restraint systems (CRS) in road vehicles. It establishes positioning zones, dimensional rules and static-strength requirements for top tether anchorages used together with seat bight anchorages (ISO 13216-1) or other lower attachment systems. The standard applies to CRS intended for children with a mass up to 22 kg and defines how vehicle anchorages must accept and transfer tether loads to the vehicle structure.

Key topics and technical requirements

Positioning zones
- Defines the wider ISOFIX zone (for CRS with rigid ISOFIX bight attachments) and conventional zones (compatible with US/Canadian regulations).
- Specifies geometric limits including angles and clearances (examples from the standard: maximum 45° above horizontal in side view; origin of tether on the CRS located 550 mm above the CRF horizontal face; strap path wraparound lengths of 250 mm and 200 mm).
- Anchorage must be located between 200 mm and 2 000 mm measured along the strap from the tether origin on the child restraint fixture (CRF).
- Notes on routing devices if anchorages are placed outside nominal zones (minimum setbacks and strength requirements).
Anchor dimensions and usability
- Anchorage hardware must permit hook-type connectors and provide adequate clearance for latching and unlatching (see figure references in the standard).
Strength and testing
- Static-strength testing using a Static Force Application Device (S-FAD) engaged with ISOFIX seat bight anchorages per ISO 13216-1.
- Webbing properties referenced (low-elongation polyester webbing, ~7–9% elongation at 11 kN) and loads applied during tests.
- Permanent deformation is acceptable in tests provided the anchorage does not break or separate from the vehicle.

Applications - who uses ISO 13216-2

Vehicle manufacturers - design and integrate compliant top tether anchorages into seats and vehicle structures.
CRS (child restraint) designers and manufacturers - ensure CRS tether connectors, straps and intended operating envelope match vehicle anchorages and ISOFIX conventions.
Testing laboratories and certification bodies - perform strength and positioning verification using S-FAD procedures.
Regulators and safety engineers - assess compatibility with national regulations and specify installation guidance for end users.

Related standards

ISO 13216-1: Seat bight anchorages and attachments
ISO 6549: H- and R-point determination for vehicle seating reference
SAE J1100: Motor vehicle dimensions
(ISO 13216 Part 3 - classification of CRS dimensions - is under preparation)

Keywords: ISO 13216-2:2004, top tether anchorages, child restraint systems, CRS, ISOFIX zones, tether strap, S-FAD, vehicle anchorages, static-strength testing.

Overview - ISO 13216-2:2004 (Top tether anchorages)

Key topics and technical requirements

Positioning zones
- Defines the wider ISOFIX zone (for CRS with rigid ISOFIX bight attachments) and conventional zones (compatible with US/Canadian regulations).
- Specifies geometric limits including angles and clearances (examples from the standard: maximum 45° above horizontal in side view; origin of tether on the CRS located 550 mm above the CRF horizontal face; strap path wraparound lengths of 250 mm and 200 mm).
- Anchorage must be located between 200 mm and 2 000 mm measured along the strap from the tether origin on the child restraint fixture (CRF).
- Notes on routing devices if anchorages are placed outside nominal zones (minimum setbacks and strength requirements).
Anchor dimensions and usability
- Anchorage hardware must permit hook-type connectors and provide adequate clearance for latching and unlatching (see figure references in the standard).
Strength and testing
- Static-strength testing using a Static Force Application Device (S-FAD) engaged with ISOFIX seat bight anchorages per ISO 13216-1.
- Webbing properties referenced (low-elongation polyester webbing, ~7–9% elongation at 11 kN) and loads applied during tests.
- Permanent deformation is acceptable in tests provided the anchorage does not break or separate from the vehicle.

Applications - who uses ISO 13216-2

Vehicle manufacturers - design and integrate compliant top tether anchorages into seats and vehicle structures.
CRS (child restraint) designers and manufacturers - ensure CRS tether connectors, straps and intended operating envelope match vehicle anchorages and ISOFIX conventions.
Testing laboratories and certification bodies - perform strength and positioning verification using S-FAD procedures.
Regulators and safety engineers - assess compatibility with national regulations and specify installation guidance for end users.

Related standards

ISO 13216-1: Seat bight anchorages and attachments
ISO 6549: H- and R-point determination for vehicle seating reference
SAE J1100: Motor vehicle dimensions
(ISO 13216 Part 3 - classification of CRS dimensions - is under preparation)

Keywords: ISO 13216-2:2004, top tether anchorages, child restraint systems, CRS, ISOFIX zones, tether strap, S-FAD, vehicle anchorages, static-strength testing.

ISO 13216-2:2004 PDF

Технические детали

Abstract

Overview - ISO 13216-2:2004 (Top tether anchorages)

Key topics and technical requirements

Applications - who uses ISO 13216-2

Related standards

Похожие стандарты

Abstract

Overview - ISO 13216-2:2004 (Top tether anchorages)

Key topics and technical requirements

Applications - who uses ISO 13216-2

Related standards

Похожие стандарты

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 1: Se…

Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Top tether a…

Road vehicles — Procedure for H-point determination

Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Lower tether…