ISO 13591:1997 PDF

Small craft — Portable fuel systems for outboard motors

Название (английский):

ISO 13591:1997

Small craft — Portable fuel systems for outboard motors

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 9
Дата публикации:: 27 ноября 1997 г.
Издание:: ISO IS 13591 edition 1 version 1
ICS:: 47.080

Тип поставки:

Full version135 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:135 €

Описание (английский):

La présente Norme internationale fixe les exigences relatives à la conception, aux matériaux et aux essais des installations à carburant portatives d'une capacité nominale inférieure ou égale à 27 l, destinées au transport et au stockage de liquides inflammables utilisés pour les moteurs hors-bord installés sur des navires de plaisance d'une longueur de coque inférieure ou égale à 24 m. Elle n'est pas applicable aux installations à carburant sous pression.

Технические детали

Технический комитет: ISO/TC 188 - Small craft
SKU: ISO 13591:1997

Abstract

Overview

ISO 13591:1997 - "Small craft - Portable fuel systems for outboard motors" defines safety, design and test requirements for portable fuel systems (portable fuel tanks, vents, filler caps, fuel connectors and hoses) intended for outboard motors on small craft up to 24 m hull length. The standard applies to systems with a rated capacity of 27 L or less and excludes pressurized fuel systems. It was prepared by ISO/TC 188 (Small craft) and includes informative annexes on owner instructions and bibliography.

Key Topics and Requirements

Scope & definitions: Covers flammable liquids (flash point < 60 °C, Reid vapour pressure < 280 kPa at 38 °C) and defines portable fuel tanks and systems.
Design & materials:
- Tanks must allow one-handed carrying, discourage stacking and provide ≥5% ullage at 20 °C.
- Tanks must be red and marked with fuel-type and fire-risk symbols.
- Materials arranged to minimize galvanic corrosion; plastics/elastomers require UV inhibitors.
- Filler neck diameters: 21.5–23.5 mm for unleaded petrol; >30 mm for other fuels.
- No solder with melting point

Overview

Key Topics and Requirements

Scope & definitions: Covers flammable liquids (flash point < 60 °C, Reid vapour pressure < 280 kPa at 38 °C) and defines portable fuel tanks and systems.
Design & materials:
- Tanks must allow one-handed carrying, discourage stacking and provide ≥5% ullage at 20 °C.
- Tanks must be red and marked with fuel-type and fire-risk symbols.
- Materials arranged to minimize galvanic corrosion; plastics/elastomers require UV inhibitors.
- Filler neck diameters: 21.5–23.5 mm for unleaded petrol; >30 mm for other fuels.
- No solder with melting point

ISO 13591:1997 PDF

Технические детали

Abstract

Overview

Key Topics and Requirements

Похожие стандарты

Abstract

Overview

Key Topics and Requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts